File manager - Edit - /home/justdoit/brinkshipping.co.uk/IO.zip
Back
PK d�\�[f� � Dir.pmnu �[��� # IO::Dir.pm # # Copyright (c) 1997-8 Graham Barr <gbarr@pobox.com>. All rights reserved. # This program is free software; you can redistribute it and/or # modify it under the same terms as Perl itself. package IO::Dir; use 5.006; use strict; use Carp; use Symbol; use Exporter; use IO::File; our(@ISA, $VERSION, @EXPORT_OK); use Tie::Hash; use File::stat; use File::Spec; @ISA = qw(Tie::Hash Exporter); $VERSION = "1.10"; $VERSION = eval $VERSION; @EXPORT_OK = qw(DIR_UNLINK); sub DIR_UNLINK () { 1 } sub new { @_ >= 1 && @_ <= 2 or croak 'usage: IO::Dir->new([DIRNAME])'; my $class = shift; my $dh = gensym; if (@_) { IO::Dir::open($dh, $_[0]) or return undef; } bless $dh, $class; } sub DESTROY { my ($dh) = @_; local($., $@, $!, $^E, $?); no warnings 'io'; closedir($dh); } sub open { @_ == 2 or croak 'usage: $dh->open(DIRNAME)'; my ($dh, $dirname) = @_; return undef unless opendir($dh, $dirname); # a dir name should always have a ":" in it; assume dirname is # in current directory $dirname = ':' . $dirname if ( ($^O eq 'MacOS') && ($dirname !~ /:/) ); ${*$dh}{io_dir_path} = $dirname; 1; } sub close { @_ == 1 or croak 'usage: $dh->close()'; my ($dh) = @_; closedir($dh); } sub read { @_ == 1 or croak 'usage: $dh->read()'; my ($dh) = @_; readdir($dh); } sub seek { @_ == 2 or croak 'usage: $dh->seek(POS)'; my ($dh,$pos) = @_; seekdir($dh,$pos); } sub tell { @_ == 1 or croak 'usage: $dh->tell()'; my ($dh) = @_; telldir($dh); } sub rewind { @_ == 1 or croak 'usage: $dh->rewind()'; my ($dh) = @_; rewinddir($dh); } sub TIEHASH { my($class,$dir,$options) = @_; my $dh = $class->new($dir) or return undef; $options ||= 0; ${*$dh}{io_dir_unlink} = $options & DIR_UNLINK; $dh; } sub FIRSTKEY { my($dh) = @_; $dh->rewind; scalar $dh->read; } sub NEXTKEY { my($dh) = @_; scalar $dh->read; } sub EXISTS { my($dh,$key) = @_; -e File::Spec->catfile(${*$dh}{io_dir_path}, $key); } sub FETCH { my($dh,$key) = @_; &lstat(File::Spec->catfile(${*$dh}{io_dir_path}, $key)); } sub STORE { my($dh,$key,$data) = @_; my($atime,$mtime) = ref($data) ? @$data : ($data,$data); my $file = File::Spec->catfile(${*$dh}{io_dir_path}, $key); unless(-e $file) { my $io = IO::File->new($file,O_CREAT | O_RDWR); $io->close if $io; } utime($atime,$mtime, $file); } sub DELETE { my($dh,$key) = @_; # Only unlink if unlink-ing is enabled return 0 unless ${*$dh}{io_dir_unlink}; my $file = File::Spec->catfile(${*$dh}{io_dir_path}, $key); -d $file ? rmdir($file) : unlink($file); } 1; __END__ =head1 NAME IO::Dir - supply object methods for directory handles =head1 SYNOPSIS use IO::Dir; $d = IO::Dir->new("."); if (defined $d) { while (defined($_ = $d->read)) { something($_); } $d->rewind; while (defined($_ = $d->read)) { something_else($_); } undef $d; } tie %dir, 'IO::Dir', "."; foreach (keys %dir) { print $_, " " , $dir{$_}->size,"\n"; } =head1 DESCRIPTION The C<IO::Dir> package provides two interfaces to perl's directory reading routines. The first interface is an object approach. C<IO::Dir> provides an object constructor and methods, which are just wrappers around perl's built in directory reading routines. =over 4 =item new ( [ DIRNAME ] ) C<new> is the constructor for C<IO::Dir> objects. It accepts one optional argument which, if given, C<new> will pass to C<open> =back The following methods are wrappers for the directory related functions built into perl (the trailing 'dir' has been removed from the names). See L<perlfunc> for details of these functions. =over 4 =item open ( DIRNAME ) =item read () =item seek ( POS ) =item tell () =item rewind () =item close () =back C<IO::Dir> also provides an interface to reading directories via a tied hash. The tied hash extends the interface beyond just the directory reading routines by the use of C<lstat>, from the C<File::stat> package, C<unlink>, C<rmdir> and C<utime>. =over 4 =item tie %hash, 'IO::Dir', DIRNAME [, OPTIONS ] =back The keys of the hash will be the names of the entries in the directory. Reading a value from the hash will be the result of calling C<File::stat::lstat>. Deleting an element from the hash will delete the corresponding file or subdirectory, provided that C<DIR_UNLINK> is included in the C<OPTIONS>. Assigning to an entry in the hash will cause the time stamps of the file to be modified. If the file does not exist then it will be created. Assigning a single integer to a hash element will cause both the access and modification times to be changed to that value. Alternatively a reference to an array of two values can be passed. The first array element will be used to set the access time and the second element will be used to set the modification time. =head1 SEE ALSO L<File::stat> =head1 AUTHOR Graham Barr. Currently maintained by the Perl Porters. Please report all bugs to <perlbug@perl.org>. =head1 COPYRIGHT Copyright (c) 1997-2003 Graham Barr <gbarr@pobox.com>. All rights reserved. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. =cut PK d�\ �& & File.pmnu �[��� # package IO::File; =head1 NAME IO::File - supply object methods for filehandles =head1 SYNOPSIS use IO::File; $fh = IO::File->new(); if ($fh->open("< file")) { print <$fh>; $fh->close; } $fh = IO::File->new("> file"); if (defined $fh) { print $fh "bar\n"; $fh->close; } $fh = IO::File->new("file", "r"); if (defined $fh) { print <$fh>; undef $fh; # automatically closes the file } $fh = IO::File->new("file", O_WRONLY|O_APPEND); if (defined $fh) { print $fh "corge\n"; $pos = $fh->getpos; $fh->setpos($pos); undef $fh; # automatically closes the file } autoflush STDOUT 1; =head1 DESCRIPTION C<IO::File> inherits from C<IO::Handle> and C<IO::Seekable>. It extends these classes with methods that are specific to file handles. =head1 CONSTRUCTOR =over 4 =item new ( FILENAME [,MODE [,PERMS]] ) Creates an C<IO::File>. If it receives any parameters, they are passed to the method C<open>; if the open fails, the object is destroyed. Otherwise, it is returned to the caller. =item new_tmpfile Creates an C<IO::File> opened for read/write on a newly created temporary file. On systems where this is possible, the temporary file is anonymous (i.e. it is unlinked after creation, but held open). If the temporary file cannot be created or opened, the C<IO::File> object is destroyed. Otherwise, it is returned to the caller. =back =head1 METHODS =over 4 =item open( FILENAME [,MODE [,PERMS]] ) =item open( FILENAME, IOLAYERS ) C<open> accepts one, two or three parameters. With one parameter, it is just a front end for the built-in C<open> function. With two or three parameters, the first parameter is a filename that may include whitespace or other special characters, and the second parameter is the open mode, optionally followed by a file permission value. If C<IO::File::open> receives a Perl mode string ("E<gt>", "+E<lt>", etc.) or an ANSI C fopen() mode string ("w", "r+", etc.), it uses the basic Perl C<open> operator (but protects any special characters). If C<IO::File::open> is given a numeric mode, it passes that mode and the optional permissions value to the Perl C<sysopen> operator. The permissions default to 0666. If C<IO::File::open> is given a mode that includes the C<:> character, it passes all the three arguments to the three-argument C<open> operator. For convenience, C<IO::File> exports the O_XXX constants from the Fcntl module, if this module is available. =item binmode( [LAYER] ) C<binmode> sets C<binmode> on the underlying C<IO> object, as documented in C<perldoc -f binmode>. C<binmode> accepts one optional parameter, which is the layer to be passed on to the C<binmode> call. =back =head1 NOTE Some operating systems may perform C<IO::File::new()> or C<IO::File::open()> on a directory without errors. This behavior is not portable and not suggested for use. Using C<opendir()> and C<readdir()> or C<IO::Dir> are suggested instead. =head1 SEE ALSO L<perlfunc>, L<perlop/"I/O Operators">, L<IO::Handle>, L<IO::Seekable>, L<IO::Dir> =head1 HISTORY Derived from FileHandle.pm by Graham Barr E<lt>F<gbarr@pobox.com>E<gt>. =cut use 5.006_001; use strict; our($VERSION, @EXPORT, @EXPORT_OK, @ISA); use Carp; use Symbol; use SelectSaver; use IO::Seekable; require Exporter; @ISA = qw(IO::Handle IO::Seekable Exporter); $VERSION = "1.16"; @EXPORT = @IO::Seekable::EXPORT; eval { # Make all Fcntl O_XXX constants available for importing require Fcntl; my @O = grep /^O_/, @Fcntl::EXPORT; Fcntl->import(@O); # first we import what we want to export push(@EXPORT, @O); }; ################################################ ## Constructor ## sub new { my $type = shift; my $class = ref($type) || $type || "IO::File"; @_ >= 0 && @_ <= 3 or croak "usage: $class->new([FILENAME [,MODE [,PERMS]]])"; my $fh = $class->SUPER::new(); if (@_) { $fh->open(@_) or return undef; } $fh; } ################################################ ## Open ## sub open { @_ >= 2 && @_ <= 4 or croak 'usage: $fh->open(FILENAME [,MODE [,PERMS]])'; my ($fh, $file) = @_; if (@_ > 2) { my ($mode, $perms) = @_[2, 3]; if ($mode =~ /^\d+$/) { defined $perms or $perms = 0666; return sysopen($fh, $file, $mode, $perms); } elsif ($mode =~ /:/) { return open($fh, $mode, $file) if @_ == 3; croak 'usage: $fh->open(FILENAME, IOLAYERS)'; } else { return open($fh, IO::Handle::_open_mode_string($mode), $file); } } open($fh, $file); } ################################################ ## Binmode ## sub binmode { ( @_ == 1 or @_ == 2 ) or croak 'usage $fh->binmode([LAYER])'; my($fh, $layer) = @_; return binmode $$fh unless $layer; return binmode $$fh, $layer; } 1; PK d�\3Y�8� � Select.pmnu �[��� # IO::Select.pm # # Copyright (c) 1997-8 Graham Barr <gbarr@pobox.com>. All rights reserved. # This program is free software; you can redistribute it and/or # modify it under the same terms as Perl itself. package IO::Select; use strict; use warnings::register; use vars qw($VERSION @ISA); require Exporter; $VERSION = "1.22"; @ISA = qw(Exporter); # This is only so we can do version checking sub VEC_BITS () {0} sub FD_COUNT () {1} sub FIRST_FD () {2} sub new { my $self = shift; my $type = ref($self) || $self; my $vec = bless [undef,0], $type; $vec->add(@_) if @_; $vec; } sub add { shift->_update('add', @_); } sub remove { shift->_update('remove', @_); } sub exists { my $vec = shift; my $fno = $vec->_fileno(shift); return undef unless defined $fno; $vec->[$fno + FIRST_FD]; } sub _fileno { my($self, $f) = @_; return unless defined $f; $f = $f->[0] if ref($f) eq 'ARRAY'; ($f =~ /^\d+$/) ? $f : fileno($f); } sub _update { my $vec = shift; my $add = shift eq 'add'; my $bits = $vec->[VEC_BITS]; $bits = '' unless defined $bits; my $count = 0; my $f; foreach $f (@_) { my $fn = $vec->_fileno($f); if ($add) { next unless defined $fn; my $i = $fn + FIRST_FD; if (defined $vec->[$i]) { $vec->[$i] = $f; # if array rest might be different, so we update next; } $vec->[FD_COUNT]++; vec($bits, $fn, 1) = 1; $vec->[$i] = $f; } else { # remove if ( ! defined $fn ) { # remove if fileno undef'd $fn = 0; for my $fe (@{$vec}[FIRST_FD .. $#$vec]) { if (defined($fe) && $fe == $f) { $vec->[FD_COUNT]--; $fe = undef; vec($bits, $fn, 1) = 0; last; } ++$fn; } } else { my $i = $fn + FIRST_FD; next unless defined $vec->[$i]; $vec->[FD_COUNT]--; vec($bits, $fn, 1) = 0; $vec->[$i] = undef; } } $count++; } $vec->[VEC_BITS] = $vec->[FD_COUNT] ? $bits : undef; $count; } sub can_read { my $vec = shift; my $timeout = shift; my $r = $vec->[VEC_BITS]; defined($r) && (select($r,undef,undef,$timeout) > 0) ? handles($vec, $r) : (); } sub can_write { my $vec = shift; my $timeout = shift; my $w = $vec->[VEC_BITS]; defined($w) && (select(undef,$w,undef,$timeout) > 0) ? handles($vec, $w) : (); } sub has_exception { my $vec = shift; my $timeout = shift; my $e = $vec->[VEC_BITS]; defined($e) && (select(undef,undef,$e,$timeout) > 0) ? handles($vec, $e) : (); } sub has_error { warnings::warn("Call to deprecated method 'has_error', use 'has_exception'") if warnings::enabled(); goto &has_exception; } sub count { my $vec = shift; $vec->[FD_COUNT]; } sub bits { my $vec = shift; $vec->[VEC_BITS]; } sub as_string # for debugging { my $vec = shift; my $str = ref($vec) . ": "; my $bits = $vec->bits; my $count = $vec->count; $str .= defined($bits) ? unpack("b*", $bits) : "undef"; $str .= " $count"; my @handles = @$vec; splice(@handles, 0, FIRST_FD); for (@handles) { $str .= " " . (defined($_) ? "$_" : "-"); } $str; } sub _max { my($a,$b,$c) = @_; $a > $b ? $a > $c ? $a : $c : $b > $c ? $b : $c; } sub select { shift if defined $_[0] && !ref($_[0]); my($r,$w,$e,$t) = @_; my @result = (); my $rb = defined $r ? $r->[VEC_BITS] : undef; my $wb = defined $w ? $w->[VEC_BITS] : undef; my $eb = defined $e ? $e->[VEC_BITS] : undef; if(select($rb,$wb,$eb,$t) > 0) { my @r = (); my @w = (); my @e = (); my $i = _max(defined $r ? scalar(@$r)-1 : 0, defined $w ? scalar(@$w)-1 : 0, defined $e ? scalar(@$e)-1 : 0); for( ; $i >= FIRST_FD ; $i--) { my $j = $i - FIRST_FD; push(@r, $r->[$i]) if defined $rb && defined $r->[$i] && vec($rb, $j, 1); push(@w, $w->[$i]) if defined $wb && defined $w->[$i] && vec($wb, $j, 1); push(@e, $e->[$i]) if defined $eb && defined $e->[$i] && vec($eb, $j, 1); } @result = (\@r, \@w, \@e); } @result; } sub handles { my $vec = shift; my $bits = shift; my @h = (); my $i; my $max = scalar(@$vec) - 1; for ($i = FIRST_FD; $i <= $max; $i++) { next unless defined $vec->[$i]; push(@h, $vec->[$i]) if !defined($bits) || vec($bits, $i - FIRST_FD, 1); } @h; } 1; __END__ =head1 NAME IO::Select - OO interface to the select system call =head1 SYNOPSIS use IO::Select; $s = IO::Select->new(); $s->add(\*STDIN); $s->add($some_handle); @ready = $s->can_read($timeout); @ready = IO::Select->new(@handles)->can_read(0); =head1 DESCRIPTION The C<IO::Select> package implements an object approach to the system C<select> function call. It allows the user to see what IO handles, see L<IO::Handle>, are ready for reading, writing or have an exception pending. =head1 CONSTRUCTOR =over 4 =item new ( [ HANDLES ] ) The constructor creates a new object and optionally initialises it with a set of handles. =back =head1 METHODS =over 4 =item add ( HANDLES ) Add the list of handles to the C<IO::Select> object. It is these values that will be returned when an event occurs. C<IO::Select> keeps these values in a cache which is indexed by the C<fileno> of the handle, so if more than one handle with the same C<fileno> is specified then only the last one is cached. Each handle can be an C<IO::Handle> object, an integer or an array reference where the first element is an C<IO::Handle> or an integer. =item remove ( HANDLES ) Remove all the given handles from the object. This method also works by the C<fileno> of the handles. So the exact handles that were added need not be passed, just handles that have an equivalent C<fileno> =item exists ( HANDLE ) Returns a true value (actually the handle itself) if it is present. Returns undef otherwise. =item handles Return an array of all registered handles. =item can_read ( [ TIMEOUT ] ) Return an array of handles that are ready for reading. C<TIMEOUT> is the maximum amount of time to wait before returning an empty list, in seconds, possibly fractional. If C<TIMEOUT> is not given and any handles are registered then the call will block. =item can_write ( [ TIMEOUT ] ) Same as C<can_read> except check for handles that can be written to. =item has_exception ( [ TIMEOUT ] ) Same as C<can_read> except check for handles that have an exception condition, for example pending out-of-band data. =item count () Returns the number of handles that the object will check for when one of the C<can_> methods is called or the object is passed to the C<select> static method. =item bits() Return the bit string suitable as argument to the core select() call. =item select ( READ, WRITE, EXCEPTION [, TIMEOUT ] ) C<select> is a static method, that is you call it with the package name like C<new>. C<READ>, C<WRITE> and C<EXCEPTION> are either C<undef> or C<IO::Select> objects. C<TIMEOUT> is optional and has the same effect as for the core select call. The result will be an array of 3 elements, each a reference to an array which will hold the handles that are ready for reading, writing and have exceptions respectively. Upon error an empty list is returned. =back =head1 EXAMPLE Here is a short example which shows how C<IO::Select> could be used to write a server which communicates with several sockets while also listening for more connections on a listen socket use IO::Select; use IO::Socket; $lsn = IO::Socket::INET->new(Listen => 1, LocalPort => 8080); $sel = IO::Select->new( $lsn ); while(@ready = $sel->can_read) { foreach $fh (@ready) { if($fh == $lsn) { # Create a new socket $new = $lsn->accept; $sel->add($new); } else { # Process socket # Maybe we have finished with the socket $sel->remove($fh); $fh->close; } } } =head1 AUTHOR Graham Barr. Currently maintained by the Perl Porters. Please report all bugs to <perlbug@perl.org>. =head1 COPYRIGHT Copyright (c) 1997-8 Graham Barr <gbarr@pobox.com>. All rights reserved. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. =cut PK d�\ ��)C C Handle.pmnu �[��� package IO::Handle; =head1 NAME IO::Handle - supply object methods for I/O handles =head1 SYNOPSIS use IO::Handle; $io = IO::Handle->new(); if ($io->fdopen(fileno(STDIN),"r")) { print $io->getline; $io->close; } $io = IO::Handle->new(); if ($io->fdopen(fileno(STDOUT),"w")) { $io->print("Some text\n"); } # setvbuf is not available by default on Perls 5.8.0 and later. use IO::Handle '_IOLBF'; $io->setvbuf($buffer_var, _IOLBF, 1024); undef $io; # automatically closes the file if it's open autoflush STDOUT 1; =head1 DESCRIPTION C<IO::Handle> is the base class for all other IO handle classes. It is not intended that objects of C<IO::Handle> would be created directly, but instead C<IO::Handle> is inherited from by several other classes in the IO hierarchy. If you are reading this documentation, looking for a replacement for the C<FileHandle> package, then I suggest you read the documentation for C<IO::File> too. =head1 CONSTRUCTOR =over 4 =item new () Creates a new C<IO::Handle> object. =item new_from_fd ( FD, MODE ) Creates an C<IO::Handle> like C<new> does. It requires two parameters, which are passed to the method C<fdopen>; if the fdopen fails, the object is destroyed. Otherwise, it is returned to the caller. =back =head1 METHODS See L<perlfunc> for complete descriptions of each of the following supported C<IO::Handle> methods, which are just front ends for the corresponding built-in functions: $io->close $io->eof $io->fcntl( FUNCTION, SCALAR ) $io->fileno $io->format_write( [FORMAT_NAME] ) $io->getc $io->ioctl( FUNCTION, SCALAR ) $io->read ( BUF, LEN, [OFFSET] ) $io->print ( ARGS ) $io->printf ( FMT, [ARGS] ) $io->say ( ARGS ) $io->stat $io->sysread ( BUF, LEN, [OFFSET] ) $io->syswrite ( BUF, [LEN, [OFFSET]] ) $io->truncate ( LEN ) See L<perlvar> for complete descriptions of each of the following supported C<IO::Handle> methods. All of them return the previous value of the attribute and takes an optional single argument that when given will set the value. If no argument is given the previous value is unchanged (except for $io->autoflush will actually turn ON autoflush by default). $io->autoflush ( [BOOL] ) $| $io->format_page_number( [NUM] ) $% $io->format_lines_per_page( [NUM] ) $= $io->format_lines_left( [NUM] ) $- $io->format_name( [STR] ) $~ $io->format_top_name( [STR] ) $^ $io->input_line_number( [NUM]) $. The following methods are not supported on a per-filehandle basis. IO::Handle->format_line_break_characters( [STR] ) $: IO::Handle->format_formfeed( [STR]) $^L IO::Handle->output_field_separator( [STR] ) $, IO::Handle->output_record_separator( [STR] ) $\ IO::Handle->input_record_separator( [STR] ) $/ Furthermore, for doing normal I/O you might need these: =over 4 =item $io->fdopen ( FD, MODE ) C<fdopen> is like an ordinary C<open> except that its first parameter is not a filename but rather a file handle name, an IO::Handle object, or a file descriptor number. (For the documentation of the C<open> method, see L<IO::File>.) =item $io->opened Returns true if the object is currently a valid file descriptor, false otherwise. =item $io->getline This works like <$io> described in L<perlop/"I/O Operators"> except that it's more readable and can be safely called in a list context but still returns just one line. If used as the conditional within a C<while> or C-style C<for> loop, however, you will need to emulate the functionality of <$io> with C<< defined($_ = $io->getline) >>. =item $io->getlines This works like <$io> when called in a list context to read all the remaining lines in a file, except that it's more readable. It will also croak() if accidentally called in a scalar context. =item $io->ungetc ( ORD ) Pushes a character with the given ordinal value back onto the given handle's input stream. Only one character of pushback per handle is guaranteed. =item $io->write ( BUF, LEN [, OFFSET ] ) This C<write> is somewhat like C<write> found in C, in that it is the opposite of read. The wrapper for the perl C<write> function is called C<format_write>. However, whilst the C C<write> function returns the number of bytes written, this C<write> function simply returns true if successful (like C<print>). A more C-like C<write> is C<syswrite> (see above). =item $io->error Returns a true value if the given handle has experienced any errors since it was opened or since the last call to C<clearerr>, or if the handle is invalid. It only returns false for a valid handle with no outstanding errors. =item $io->clearerr Clear the given handle's error indicator. Returns -1 if the handle is invalid, 0 otherwise. =item $io->sync C<sync> synchronizes a file's in-memory state with that on the physical medium. C<sync> does not operate at the perlio api level, but operates on the file descriptor (similar to sysread, sysseek and systell). This means that any data held at the perlio api level will not be synchronized. To synchronize data that is buffered at the perlio api level you must use the flush method. C<sync> is not implemented on all platforms. Returns "0 but true" on success, C<undef> on error, C<undef> for an invalid handle. See L<fsync(3c)>. =item $io->flush C<flush> causes perl to flush any buffered data at the perlio api level. Any unread data in the buffer will be discarded, and any unwritten data will be written to the underlying file descriptor. Returns "0 but true" on success, C<undef> on error. =item $io->printflush ( ARGS ) Turns on autoflush, print ARGS and then restores the autoflush status of the C<IO::Handle> object. Returns the return value from print. =item $io->blocking ( [ BOOL ] ) If called with an argument C<blocking> will turn on non-blocking IO if C<BOOL> is false, and turn it off if C<BOOL> is true. C<blocking> will return the value of the previous setting, or the current setting if C<BOOL> is not given. If an error occurs C<blocking> will return undef and C<$!> will be set. =back If the C functions setbuf() and/or setvbuf() are available, then C<IO::Handle::setbuf> and C<IO::Handle::setvbuf> set the buffering policy for an IO::Handle. The calling sequences for the Perl functions are the same as their C counterparts--including the constants C<_IOFBF>, C<_IOLBF>, and C<_IONBF> for setvbuf()--except that the buffer parameter specifies a scalar variable to use as a buffer. You should only change the buffer before any I/O, or immediately after calling flush. WARNING: The IO::Handle::setvbuf() is not available by default on Perls 5.8.0 and later because setvbuf() is rather specific to using the stdio library, while Perl prefers the new perlio subsystem instead. WARNING: A variable used as a buffer by C<setbuf> or C<setvbuf> B<must not be modified> in any way until the IO::Handle is closed or C<setbuf> or C<setvbuf> is called again, or memory corruption may result! Remember that the order of global destruction is undefined, so even if your buffer variable remains in scope until program termination, it may be undefined before the file IO::Handle is closed. Note that you need to import the constants C<_IOFBF>, C<_IOLBF>, and C<_IONBF> explicitly. Like C, setbuf returns nothing. setvbuf returns "0 but true", on success, C<undef> on failure. Lastly, there is a special method for working under B<-T> and setuid/gid scripts: =over 4 =item $io->untaint Marks the object as taint-clean, and as such data read from it will also be considered taint-clean. Note that this is a very trusting action to take, and appropriate consideration for the data source and potential vulnerability should be kept in mind. Returns 0 on success, -1 if setting the taint-clean flag failed. (eg invalid handle) =back =head1 NOTE An C<IO::Handle> object is a reference to a symbol/GLOB reference (see the C<Symbol> package). Some modules that inherit from C<IO::Handle> may want to keep object related variables in the hash table part of the GLOB. In an attempt to prevent modules trampling on each other I propose the that any such module should prefix its variables with its own name separated by _'s. For example the IO::Socket module keeps a C<timeout> variable in 'io_socket_timeout'. =head1 SEE ALSO L<perlfunc>, L<perlop/"I/O Operators">, L<IO::File> =head1 BUGS Due to backwards compatibility, all filehandles resemble objects of class C<IO::Handle>, or actually classes derived from that class. They actually aren't. Which means you can't derive your own class from C<IO::Handle> and inherit those methods. =head1 HISTORY Derived from FileHandle.pm by Graham Barr E<lt>F<gbarr@pobox.com>E<gt> =cut use 5.006_001; use strict; our($VERSION, @EXPORT_OK, @ISA); use Carp; use Symbol; use SelectSaver; use IO (); # Load the XS module require Exporter; @ISA = qw(Exporter); $VERSION = "1.36"; $VERSION = eval $VERSION; @EXPORT_OK = qw( autoflush output_field_separator output_record_separator input_record_separator input_line_number format_page_number format_lines_per_page format_lines_left format_name format_top_name format_line_break_characters format_formfeed format_write print printf say getline getlines printflush flush SEEK_SET SEEK_CUR SEEK_END _IOFBF _IOLBF _IONBF ); ################################################ ## Constructors, destructors. ## sub new { my $class = ref($_[0]) || $_[0] || "IO::Handle"; if (@_ != 1) { # Since perl will automatically require IO::File if needed, but # also initialises IO::File's @ISA as part of the core we must # ensure IO::File is loaded if IO::Handle is. This avoids effect- # ively "half-loading" IO::File. if ($] > 5.013 && $class eq 'IO::File' && !$INC{"IO/File.pm"}) { require IO::File; shift; return IO::File::->new(@_); } croak "usage: $class->new()"; } my $io = gensym; bless $io, $class; } sub new_from_fd { my $class = ref($_[0]) || $_[0] || "IO::Handle"; @_ == 3 or croak "usage: $class->new_from_fd(FD, MODE)"; my $io = gensym; shift; IO::Handle::fdopen($io, @_) or return undef; bless $io, $class; } # # There is no need for DESTROY to do anything, because when the # last reference to an IO object is gone, Perl automatically # closes its associated files (if any). However, to avoid any # attempts to autoload DESTROY, we here define it to do nothing. # sub DESTROY {} ################################################ ## Open and close. ## sub _open_mode_string { my ($mode) = @_; $mode =~ /^\+?(<|>>?)$/ or $mode =~ s/^r(\+?)$/$1</ or $mode =~ s/^w(\+?)$/$1>/ or $mode =~ s/^a(\+?)$/$1>>/ or croak "IO::Handle: bad open mode: $mode"; $mode; } sub fdopen { @_ == 3 or croak 'usage: $io->fdopen(FD, MODE)'; my ($io, $fd, $mode) = @_; local(*GLOB); if (ref($fd) && "".$fd =~ /GLOB\(/o) { # It's a glob reference; Alias it as we cannot get name of anon GLOBs my $n = qualify(*GLOB); *GLOB = *{*$fd}; $fd = $n; } elsif ($fd =~ m#^\d+$#) { # It's an FD number; prefix with "=". $fd = "=$fd"; } open($io, _open_mode_string($mode) . '&' . $fd) ? $io : undef; } sub close { @_ == 1 or croak 'usage: $io->close()'; my($io) = @_; close($io); } ################################################ ## Normal I/O functions. ## # flock # select sub opened { @_ == 1 or croak 'usage: $io->opened()'; defined fileno($_[0]); } sub fileno { @_ == 1 or croak 'usage: $io->fileno()'; fileno($_[0]); } sub getc { @_ == 1 or croak 'usage: $io->getc()'; getc($_[0]); } sub eof { @_ == 1 or croak 'usage: $io->eof()'; eof($_[0]); } sub print { @_ or croak 'usage: $io->print(ARGS)'; my $this = shift; print $this @_; } sub printf { @_ >= 2 or croak 'usage: $io->printf(FMT,[ARGS])'; my $this = shift; printf $this @_; } sub say { @_ or croak 'usage: $io->say(ARGS)'; my $this = shift; local $\ = "\n"; print $this @_; } # Special XS wrapper to make them inherit lexical hints from the caller. _create_getline_subs( <<'END' ) or die $@; sub getline { @_ == 1 or croak 'usage: $io->getline()'; my $this = shift; return scalar <$this>; } sub getlines { @_ == 1 or croak 'usage: $io->getlines()'; wantarray or croak 'Can\'t call $io->getlines in a scalar context, use $io->getline'; my $this = shift; return <$this>; } 1; # return true for error checking END *gets = \&getline; # deprecated sub truncate { @_ == 2 or croak 'usage: $io->truncate(LEN)'; truncate($_[0], $_[1]); } sub read { @_ == 3 || @_ == 4 or croak 'usage: $io->read(BUF, LEN [, OFFSET])'; read($_[0], $_[1], $_[2], $_[3] || 0); } sub sysread { @_ == 3 || @_ == 4 or croak 'usage: $io->sysread(BUF, LEN [, OFFSET])'; sysread($_[0], $_[1], $_[2], $_[3] || 0); } sub write { @_ >= 2 && @_ <= 4 or croak 'usage: $io->write(BUF [, LEN [, OFFSET]])'; local($\) = ""; $_[2] = length($_[1]) unless defined $_[2]; print { $_[0] } substr($_[1], $_[3] || 0, $_[2]); } sub syswrite { @_ >= 2 && @_ <= 4 or croak 'usage: $io->syswrite(BUF [, LEN [, OFFSET]])'; if (defined($_[2])) { syswrite($_[0], $_[1], $_[2], $_[3] || 0); } else { syswrite($_[0], $_[1]); } } sub stat { @_ == 1 or croak 'usage: $io->stat()'; stat($_[0]); } ################################################ ## State modification functions. ## sub autoflush { my $old = new SelectSaver qualify($_[0], caller); my $prev = $|; $| = @_ > 1 ? $_[1] : 1; $prev; } sub output_field_separator { carp "output_field_separator is not supported on a per-handle basis" if ref($_[0]); my $prev = $,; $, = $_[1] if @_ > 1; $prev; } sub output_record_separator { carp "output_record_separator is not supported on a per-handle basis" if ref($_[0]); my $prev = $\; $\ = $_[1] if @_ > 1; $prev; } sub input_record_separator { carp "input_record_separator is not supported on a per-handle basis" if ref($_[0]); my $prev = $/; $/ = $_[1] if @_ > 1; $prev; } sub input_line_number { local $.; () = tell qualify($_[0], caller) if ref($_[0]); my $prev = $.; $. = $_[1] if @_ > 1; $prev; } sub format_page_number { my $old; $old = new SelectSaver qualify($_[0], caller) if ref($_[0]); my $prev = $%; $% = $_[1] if @_ > 1; $prev; } sub format_lines_per_page { my $old; $old = new SelectSaver qualify($_[0], caller) if ref($_[0]); my $prev = $=; $= = $_[1] if @_ > 1; $prev; } sub format_lines_left { my $old; $old = new SelectSaver qualify($_[0], caller) if ref($_[0]); my $prev = $-; $- = $_[1] if @_ > 1; $prev; } sub format_name { my $old; $old = new SelectSaver qualify($_[0], caller) if ref($_[0]); my $prev = $~; $~ = qualify($_[1], caller) if @_ > 1; $prev; } sub format_top_name { my $old; $old = new SelectSaver qualify($_[0], caller) if ref($_[0]); my $prev = $^; $^ = qualify($_[1], caller) if @_ > 1; $prev; } sub format_line_break_characters { carp "format_line_break_characters is not supported on a per-handle basis" if ref($_[0]); my $prev = $:; $: = $_[1] if @_ > 1; $prev; } sub format_formfeed { carp "format_formfeed is not supported on a per-handle basis" if ref($_[0]); my $prev = $^L; $^L = $_[1] if @_ > 1; $prev; } sub formline { my $io = shift; my $picture = shift; local($^A) = $^A; local($\) = ""; formline($picture, @_); print $io $^A; } sub format_write { @_ < 3 || croak 'usage: $io->write( [FORMAT_NAME] )'; if (@_ == 2) { my ($io, $fmt) = @_; my $oldfmt = $io->format_name(qualify($fmt,caller)); CORE::write($io); $io->format_name($oldfmt); } else { CORE::write($_[0]); } } sub fcntl { @_ == 3 || croak 'usage: $io->fcntl( OP, VALUE );'; my ($io, $op) = @_; return fcntl($io, $op, $_[2]); } sub ioctl { @_ == 3 || croak 'usage: $io->ioctl( OP, VALUE );'; my ($io, $op) = @_; return ioctl($io, $op, $_[2]); } # this sub is for compatibility with older releases of IO that used # a sub called constant to determine if a constant existed -- GMB # # The SEEK_* and _IO?BF constants were the only constants at that time # any new code should just check defined(&CONSTANT_NAME) sub constant { no strict 'refs'; my $name = shift; (($name =~ /^(SEEK_(SET|CUR|END)|_IO[FLN]BF)$/) && defined &{$name}) ? &{$name}() : undef; } # so that flush.pl can be deprecated sub printflush { my $io = shift; my $old; $old = new SelectSaver qualify($io, caller) if ref($io); local $| = 1; if(ref($io)) { print $io @_; } else { print @_; } } 1; PK d�\�D���> �> Socket.pmnu �[��� # IO::Socket.pm # # Copyright (c) 1997-8 Graham Barr <gbarr@pobox.com>. All rights reserved. # This program is free software; you can redistribute it and/or # modify it under the same terms as Perl itself. package IO::Socket; require 5.006; use IO::Handle; use Socket 1.3; use Carp; use strict; our(@ISA, $VERSION, @EXPORT_OK); use Exporter; use Errno; # legacy require IO::Socket::INET; require IO::Socket::UNIX if ($^O ne 'epoc' && $^O ne 'symbian'); @ISA = qw(IO::Handle); $VERSION = "1.38"; @EXPORT_OK = qw(sockatmark); sub import { my $pkg = shift; if (@_ && $_[0] eq 'sockatmark') { # not very extensible but for now, fast Exporter::export_to_level('IO::Socket', 1, $pkg, 'sockatmark'); } else { my $callpkg = caller; Exporter::export 'Socket', $callpkg, @_; } } sub new { my($class,%arg) = @_; my $sock = $class->SUPER::new(); $sock->autoflush(1); ${*$sock}{'io_socket_timeout'} = delete $arg{Timeout}; return scalar(%arg) ? $sock->configure(\%arg) : $sock; } my @domain2pkg; sub register_domain { my($p,$d) = @_; $domain2pkg[$d] = $p; } sub configure { my($sock,$arg) = @_; my $domain = delete $arg->{Domain}; croak 'IO::Socket: Cannot configure a generic socket' unless defined $domain; croak "IO::Socket: Unsupported socket domain" unless defined $domain2pkg[$domain]; croak "IO::Socket: Cannot configure socket in domain '$domain'" unless ref($sock) eq "IO::Socket"; bless($sock, $domain2pkg[$domain]); $sock->configure($arg); } sub socket { @_ == 4 or croak 'usage: $sock->socket(DOMAIN, TYPE, PROTOCOL)'; my($sock,$domain,$type,$protocol) = @_; socket($sock,$domain,$type,$protocol) or return undef; ${*$sock}{'io_socket_domain'} = $domain; ${*$sock}{'io_socket_type'} = $type; ${*$sock}{'io_socket_proto'} = $protocol; $sock; } sub socketpair { @_ == 4 || croak 'usage: IO::Socket->socketpair(DOMAIN, TYPE, PROTOCOL)'; my($class,$domain,$type,$protocol) = @_; my $sock1 = $class->new(); my $sock2 = $class->new(); socketpair($sock1,$sock2,$domain,$type,$protocol) or return (); ${*$sock1}{'io_socket_type'} = ${*$sock2}{'io_socket_type'} = $type; ${*$sock1}{'io_socket_proto'} = ${*$sock2}{'io_socket_proto'} = $protocol; ($sock1,$sock2); } sub connect { @_ == 2 or croak 'usage: $sock->connect(NAME)'; my $sock = shift; my $addr = shift; my $timeout = ${*$sock}{'io_socket_timeout'}; my $err; my $blocking; $blocking = $sock->blocking(0) if $timeout; if (!connect($sock, $addr)) { if (defined $timeout && ($!{EINPROGRESS} || $!{EWOULDBLOCK})) { require IO::Select; my $sel = new IO::Select $sock; undef $!; my($r,$w,$e) = IO::Select::select(undef,$sel,$sel,$timeout); if(@$e[0]) { # Windows return from select after the timeout in case of # WSAECONNREFUSED(10061) if exception set is not used. # This behavior is different from Linux. # Using the exception # set we now emulate the behavior in Linux # - Karthik Rajagopalan $err = $sock->getsockopt(SOL_SOCKET,SO_ERROR); $@ = "connect: $err"; } elsif(!@$w[0]) { $err = $! || (exists &Errno::ETIMEDOUT ? &Errno::ETIMEDOUT : 1); $@ = "connect: timeout"; } elsif (!connect($sock,$addr) && not ($!{EISCONN} || ($^O eq 'MSWin32' && ($! == (($] < 5.019004) ? 10022 : Errno::EINVAL)))) ) { # Some systems refuse to re-connect() to # an already open socket and set errno to EISCONN. # Windows sets errno to WSAEINVAL (10022) (pre-5.19.4) or # EINVAL (22) (5.19.4 onwards). $err = $!; $@ = "connect: $!"; } } elsif ($blocking || !($!{EINPROGRESS} || $!{EWOULDBLOCK})) { $err = $!; $@ = "connect: $!"; } } $sock->blocking(1) if $blocking; $! = $err if $err; $err ? undef : $sock; } # Enable/disable blocking IO on sockets. # Without args return the current status of blocking, # with args change the mode as appropriate, returning the # old setting, or in case of error during the mode change # undef. sub blocking { my $sock = shift; return $sock->SUPER::blocking(@_) if $^O ne 'MSWin32' && $^O ne 'VMS'; # Windows handles blocking differently # # http://groups.google.co.uk/group/perl.perl5.porters/browse_thread/thread/b4e2b1d88280ddff/630b667a66e3509f?#630b667a66e3509f # http://msdn.microsoft.com/library/default.asp?url=/library/en-us/winsock/winsock/ioctlsocket_2.asp # # 0x8004667e is FIONBIO # # which is used to set blocking behaviour. # NOTE: # This is a little confusing, the perl keyword for this is # 'blocking' but the OS level behaviour is 'non-blocking', probably # because sockets are blocking by default. # Therefore internally we have to reverse the semantics. my $orig= !${*$sock}{io_sock_nonblocking}; return $orig unless @_; my $block = shift; if ( !$block != !$orig ) { ${*$sock}{io_sock_nonblocking} = $block ? 0 : 1; ioctl($sock, 0x8004667e, pack("L!",${*$sock}{io_sock_nonblocking})) or return undef; } return $orig; } sub close { @_ == 1 or croak 'usage: $sock->close()'; my $sock = shift; ${*$sock}{'io_socket_peername'} = undef; $sock->SUPER::close(); } sub bind { @_ == 2 or croak 'usage: $sock->bind(NAME)'; my $sock = shift; my $addr = shift; return bind($sock, $addr) ? $sock : undef; } sub listen { @_ >= 1 && @_ <= 2 or croak 'usage: $sock->listen([QUEUE])'; my($sock,$queue) = @_; $queue = 5 unless $queue && $queue > 0; return listen($sock, $queue) ? $sock : undef; } sub accept { @_ == 1 || @_ == 2 or croak 'usage $sock->accept([PKG])'; my $sock = shift; my $pkg = shift || $sock; my $timeout = ${*$sock}{'io_socket_timeout'}; my $new = $pkg->new(Timeout => $timeout); my $peer = undef; if(defined $timeout) { require IO::Select; my $sel = new IO::Select $sock; unless ($sel->can_read($timeout)) { $@ = 'accept: timeout'; $! = (exists &Errno::ETIMEDOUT ? &Errno::ETIMEDOUT : 1); return; } } $peer = accept($new,$sock) or return; ${*$new}{$_} = ${*$sock}{$_} for qw( io_socket_domain io_socket_type io_socket_proto ); return wantarray ? ($new, $peer) : $new; } sub sockname { @_ == 1 or croak 'usage: $sock->sockname()'; getsockname($_[0]); } sub peername { @_ == 1 or croak 'usage: $sock->peername()'; my($sock) = @_; ${*$sock}{'io_socket_peername'} ||= getpeername($sock); } sub connected { @_ == 1 or croak 'usage: $sock->connected()'; my($sock) = @_; getpeername($sock); } sub send { @_ >= 2 && @_ <= 4 or croak 'usage: $sock->send(BUF, [FLAGS, [TO]])'; my $sock = $_[0]; my $flags = $_[2] || 0; my $peer = $_[3] || $sock->peername; croak 'send: Cannot determine peer address' unless(defined $peer); my $r = defined(getpeername($sock)) ? send($sock, $_[1], $flags) : send($sock, $_[1], $flags, $peer); # remember who we send to, if it was successful ${*$sock}{'io_socket_peername'} = $peer if(@_ == 4 && defined $r); $r; } sub recv { @_ == 3 || @_ == 4 or croak 'usage: $sock->recv(BUF, LEN [, FLAGS])'; my $sock = $_[0]; my $len = $_[2]; my $flags = $_[3] || 0; # remember who we recv'd from ${*$sock}{'io_socket_peername'} = recv($sock, $_[1]='', $len, $flags); } sub shutdown { @_ == 2 or croak 'usage: $sock->shutdown(HOW)'; my($sock, $how) = @_; ${*$sock}{'io_socket_peername'} = undef; shutdown($sock, $how); } sub setsockopt { @_ == 4 or croak '$sock->setsockopt(LEVEL, OPTNAME, OPTVAL)'; setsockopt($_[0],$_[1],$_[2],$_[3]); } my $intsize = length(pack("i",0)); sub getsockopt { @_ == 3 or croak '$sock->getsockopt(LEVEL, OPTNAME)'; my $r = getsockopt($_[0],$_[1],$_[2]); # Just a guess $r = unpack("i", $r) if(defined $r && length($r) == $intsize); $r; } sub sockopt { my $sock = shift; @_ == 1 ? $sock->getsockopt(SOL_SOCKET,@_) : $sock->setsockopt(SOL_SOCKET,@_); } sub atmark { @_ == 1 or croak 'usage: $sock->atmark()'; my($sock) = @_; sockatmark($sock); } sub timeout { @_ == 1 || @_ == 2 or croak 'usage: $sock->timeout([VALUE])'; my($sock,$val) = @_; my $r = ${*$sock}{'io_socket_timeout'}; ${*$sock}{'io_socket_timeout'} = defined $val ? 0 + $val : $val if(@_ == 2); $r; } sub sockdomain { @_ == 1 or croak 'usage: $sock->sockdomain()'; my $sock = shift; if (!defined(${*$sock}{'io_socket_domain'})) { my $addr = $sock->sockname(); ${*$sock}{'io_socket_domain'} = sockaddr_family($addr) if (defined($addr)); } ${*$sock}{'io_socket_domain'}; } sub socktype { @_ == 1 or croak 'usage: $sock->socktype()'; my $sock = shift; ${*$sock}{'io_socket_type'} = $sock->sockopt(Socket::SO_TYPE) if (!defined(${*$sock}{'io_socket_type'}) && defined(eval{Socket::SO_TYPE})); ${*$sock}{'io_socket_type'} } sub protocol { @_ == 1 or croak 'usage: $sock->protocol()'; my($sock) = @_; ${*$sock}{'io_socket_proto'} = $sock->sockopt(Socket::SO_PROTOCOL) if (!defined(${*$sock}{'io_socket_proto'}) && defined(eval{Socket::SO_PROTOCOL})); ${*$sock}{'io_socket_proto'}; } 1; __END__ =head1 NAME IO::Socket - Object interface to socket communications =head1 SYNOPSIS use IO::Socket; =head1 DESCRIPTION C<IO::Socket> provides an object interface to creating and using sockets. It is built upon the L<IO::Handle> interface and inherits all the methods defined by L<IO::Handle>. C<IO::Socket> only defines methods for those operations which are common to all types of socket. Operations which are specified to a socket in a particular domain have methods defined in sub classes of C<IO::Socket> C<IO::Socket> will export all functions (and constants) defined by L<Socket>. =head1 CONSTRUCTOR =over 4 =item new ( [ARGS] ) Creates an C<IO::Socket>, which is a reference to a newly created symbol (see the C<Symbol> package). C<new> optionally takes arguments, these arguments are in key-value pairs. C<new> only looks for one key C<Domain> which tells new which domain the socket will be in. All other arguments will be passed to the configuration method of the package for that domain, See below. NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE As of VERSION 1.18 all IO::Socket objects have autoflush turned on by default. This was not the case with earlier releases. NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE =back =head1 METHODS See L<perlfunc> for complete descriptions of each of the following supported C<IO::Socket> methods, which are just front ends for the corresponding built-in functions: socket socketpair bind listen accept send recv peername (getpeername) sockname (getsockname) shutdown Some methods take slightly different arguments to those defined in L<perlfunc> in attempt to make the interface more flexible. These are =over 4 =item accept([PKG]) perform the system call C<accept> on the socket and return a new object. The new object will be created in the same class as the listen socket, unless C<PKG> is specified. This object can be used to communicate with the client that was trying to connect. In a scalar context the new socket is returned, or undef upon failure. In a list context a two-element array is returned containing the new socket and the peer address; the list will be empty upon failure. The timeout in the [PKG] can be specified as zero to effect a "poll", but you shouldn't do that because a new IO::Select object will be created behind the scenes just to do the single poll. This is horrendously inefficient. Use rather true select() with a zero timeout on the handle, or non-blocking IO. =item socketpair(DOMAIN, TYPE, PROTOCOL) Call C<socketpair> and return a list of two sockets created, or an empty list on failure. =back Additional methods that are provided are: =over 4 =item atmark True if the socket is currently positioned at the urgent data mark, false otherwise. use IO::Socket; my $sock = IO::Socket::INET->new('some_server'); $sock->read($data, 1024) until $sock->atmark; Note: this is a reasonably new addition to the family of socket functions, so all systems may not support this yet. If it is unsupported by the system, an attempt to use this method will abort the program. The atmark() functionality is also exportable as sockatmark() function: use IO::Socket 'sockatmark'; This allows for a more traditional use of sockatmark() as a procedural socket function. If your system does not support sockatmark(), the C<use> declaration will fail at compile time. =item connected If the socket is in a connected state, the peer address is returned. If the socket is not in a connected state, undef is returned. Note that connected() considers a half-open TCP socket to be "in a connected state". Specifically, connected() does not distinguish between the B<ESTABLISHED> and B<CLOSE-WAIT> TCP states; it returns the peer address, rather than undef, in either case. Thus, in general, connected() cannot be used to reliably learn whether the peer has initiated a graceful shutdown because in most cases (see below) the local TCP state machine remains in B<CLOSE-WAIT> until the local application calls shutdown() or close(); only at that point does connected() return undef. The "in most cases" hedge is because local TCP state machine behavior may depend on the peer's socket options. In particular, if the peer socket has SO_LINGER enabled with a zero timeout, then the peer's close() will generate a RST segment, upon receipt of which the local TCP transitions immediately to B<CLOSED>, and in that state, connected() I<will> return undef. =item protocol Returns the numerical number for the protocol being used on the socket, if known. If the protocol is unknown, as with an AF_UNIX socket, zero is returned. =item sockdomain Returns the numerical number for the socket domain type. For example, for an AF_INET socket the value of &AF_INET will be returned. =item sockopt(OPT [, VAL]) Unified method to both set and get options in the SOL_SOCKET level. If called with one argument then getsockopt is called, otherwise setsockopt is called. =item getsockopt(LEVEL, OPT) Get option associated with the socket. Other levels than SOL_SOCKET may be specified here. =item setsockopt(LEVEL, OPT, VAL) Set option associated with the socket. Other levels than SOL_SOCKET may be specified here. =item socktype Returns the numerical number for the socket type. For example, for a SOCK_STREAM socket the value of &SOCK_STREAM will be returned. =item timeout([VAL]) Set or get the timeout value (in seconds) associated with this socket. If called without any arguments then the current setting is returned. If called with an argument the current setting is changed and the previous value returned. =back =head1 LIMITATIONS On some systems, for an IO::Socket object created with new_from_fd(), or created with accept() from such an object, the protocol(), sockdomain() and socktype() methods may return undef. =head1 SEE ALSO L<Socket>, L<IO::Handle>, L<IO::Socket::INET>, L<IO::Socket::UNIX> =head1 AUTHOR Graham Barr. atmark() by Lincoln Stein. Currently maintained by the Perl Porters. Please report all bugs to <perlbug@perl.org>. =head1 COPYRIGHT Copyright (c) 1997-8 Graham Barr <gbarr@pobox.com>. All rights reserved. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. The atmark() implementation: Copyright 2001, Lincoln Stein <lstein@cshl.org>. This module is distributed under the same terms as Perl itself. Feel free to use, modify and redistribute it as long as you retain the correct attribution. =cut PK d�\���w w Seekable.pmnu �[��� # package IO::Seekable; =head1 NAME IO::Seekable - supply seek based methods for I/O objects =head1 SYNOPSIS use IO::Seekable; package IO::Something; @ISA = qw(IO::Seekable); =head1 DESCRIPTION C<IO::Seekable> does not have a constructor of its own as it is intended to be inherited by other C<IO::Handle> based objects. It provides methods which allow seeking of the file descriptors. =over 4 =item $io->getpos Returns an opaque value that represents the current position of the IO::File, or C<undef> if this is not possible (eg an unseekable stream such as a terminal, pipe or socket). If the fgetpos() function is available in your C library it is used to implements getpos, else perl emulates getpos using C's ftell() function. =item $io->setpos Uses the value of a previous getpos call to return to a previously visited position. Returns "0 but true" on success, C<undef> on failure. =back See L<perlfunc> for complete descriptions of each of the following supported C<IO::Seekable> methods, which are just front ends for the corresponding built-in functions: =over 4 =item $io->seek ( POS, WHENCE ) Seek the IO::File to position POS, relative to WHENCE: =over 8 =item WHENCE=0 (SEEK_SET) POS is absolute position. (Seek relative to the start of the file) =item WHENCE=1 (SEEK_CUR) POS is an offset from the current position. (Seek relative to current) =item WHENCE=2 (SEEK_END) POS is an offset from the end of the file. (Seek relative to end) =back The SEEK_* constants can be imported from the C<Fcntl> module if you don't wish to use the numbers C<0> C<1> or C<2> in your code. Returns C<1> upon success, C<0> otherwise. =item $io->sysseek( POS, WHENCE ) Similar to $io->seek, but sets the IO::File's position using the system call lseek(2) directly, so will confuse most perl IO operators except sysread and syswrite (see L<perlfunc> for full details) Returns the new position, or C<undef> on failure. A position of zero is returned as the string C<"0 but true"> =item $io->tell Returns the IO::File's current position, or -1 on error. =back =head1 SEE ALSO L<perlfunc>, L<perlop/"I/O Operators">, L<IO::Handle> L<IO::File> =head1 HISTORY Derived from FileHandle.pm by Graham Barr E<lt>gbarr@pobox.comE<gt> =cut use 5.006_001; use Carp; use strict; our($VERSION, @EXPORT, @ISA); use IO::Handle (); # XXX we can't get these from IO::Handle or we'll get prototype # mismatch warnings on C<use POSIX; use IO::File;> :-( use Fcntl qw(SEEK_SET SEEK_CUR SEEK_END); require Exporter; @EXPORT = qw(SEEK_SET SEEK_CUR SEEK_END); @ISA = qw(Exporter); $VERSION = "1.10"; $VERSION = eval $VERSION; sub seek { @_ == 3 or croak 'usage: $io->seek(POS, WHENCE)'; seek($_[0], $_[1], $_[2]); } sub sysseek { @_ == 3 or croak 'usage: $io->sysseek(POS, WHENCE)'; sysseek($_[0], $_[1], $_[2]); } sub tell { @_ == 1 or croak 'usage: $io->tell()'; tell($_[0]); } 1; PK d�\V�y�` ` Pipe.pmnu �[��� # IO::Pipe.pm # # Copyright (c) 1996-8 Graham Barr <gbarr@pobox.com>. All rights reserved. # This program is free software; you can redistribute it and/or # modify it under the same terms as Perl itself. package IO::Pipe; use 5.006_001; use IO::Handle; use strict; our($VERSION); use Carp; use Symbol; $VERSION = "1.15"; sub new { my $type = shift; my $class = ref($type) || $type || "IO::Pipe"; @_ == 0 || @_ == 2 or croak "usage: $class->([READFH, WRITEFH])"; my $me = bless gensym(), $class; my($readfh,$writefh) = @_ ? @_ : $me->handles; pipe($readfh, $writefh) or return undef; @{*$me} = ($readfh, $writefh); $me; } sub handles { @_ == 1 or croak 'usage: $pipe->handles()'; (IO::Pipe::End->new(), IO::Pipe::End->new()); } my $do_spawn = $^O eq 'os2' || $^O eq 'MSWin32'; sub _doit { my $me = shift; my $rw = shift; my $pid = $do_spawn ? 0 : fork(); if($pid) { # Parent return $pid; } elsif(defined $pid) { # Child or spawn my $fh; my $io = $rw ? \*STDIN : \*STDOUT; my ($mode, $save) = $rw ? "r" : "w"; if ($do_spawn) { require Fcntl; $save = IO::Handle->new_from_fd($io, $mode); my $handle = shift; # Close in child: unless ($^O eq 'MSWin32') { fcntl($handle, Fcntl::F_SETFD(), 1) or croak "fcntl: $!"; } $fh = $rw ? ${*$me}[0] : ${*$me}[1]; } else { shift; $fh = $rw ? $me->reader() : $me->writer(); # close the other end } bless $io, "IO::Handle"; $io->fdopen($fh, $mode); $fh->close; if ($do_spawn) { $pid = eval { system 1, @_ }; # 1 == P_NOWAIT my $err = $!; $io->fdopen($save, $mode); $save->close or croak "Cannot close $!"; croak "IO::Pipe: Cannot spawn-NOWAIT: $err" if not $pid or $pid < 0; return $pid; } else { exec @_ or croak "IO::Pipe: Cannot exec: $!"; } } else { croak "IO::Pipe: Cannot fork: $!"; } # NOT Reached } sub reader { @_ >= 1 or croak 'usage: $pipe->reader( [SUB_COMMAND_ARGS] )'; my $me = shift; return undef unless(ref($me) || ref($me = $me->new)); my $fh = ${*$me}[0]; my $pid; $pid = $me->_doit(0, $fh, @_) if(@_); close ${*$me}[1]; bless $me, ref($fh); *$me = *$fh; # Alias self to handle $me->fdopen($fh->fileno,"r") unless defined($me->fileno); bless $fh; # Really wan't un-bless here ${*$me}{'io_pipe_pid'} = $pid if defined $pid; $me; } sub writer { @_ >= 1 or croak 'usage: $pipe->writer( [SUB_COMMAND_ARGS] )'; my $me = shift; return undef unless(ref($me) || ref($me = $me->new)); my $fh = ${*$me}[1]; my $pid; $pid = $me->_doit(1, $fh, @_) if(@_); close ${*$me}[0]; bless $me, ref($fh); *$me = *$fh; # Alias self to handle $me->fdopen($fh->fileno,"w") unless defined($me->fileno); bless $fh; # Really wan't un-bless here ${*$me}{'io_pipe_pid'} = $pid if defined $pid; $me; } package IO::Pipe::End; our(@ISA); @ISA = qw(IO::Handle); sub close { my $fh = shift; my $r = $fh->SUPER::close(@_); waitpid(${*$fh}{'io_pipe_pid'},0) if(defined ${*$fh}{'io_pipe_pid'}); $r; } 1; __END__ =head1 NAME IO::Pipe - supply object methods for pipes =head1 SYNOPSIS use IO::Pipe; $pipe = IO::Pipe->new(); if($pid = fork()) { # Parent $pipe->reader(); while(<$pipe>) { ... } } elsif(defined $pid) { # Child $pipe->writer(); print $pipe ... } or $pipe = IO::Pipe->new(); $pipe->reader(qw(ls -l)); while(<$pipe>) { ... } =head1 DESCRIPTION C<IO::Pipe> provides an interface to creating pipes between processes. =head1 CONSTRUCTOR =over 4 =item new ( [READER, WRITER] ) Creates an C<IO::Pipe>, which is a reference to a newly created symbol (see the C<Symbol> package). C<IO::Pipe::new> optionally takes two arguments, which should be objects blessed into C<IO::Handle>, or a subclass thereof. These two objects will be used for the system call to C<pipe>. If no arguments are given then method C<handles> is called on the new C<IO::Pipe> object. These two handles are held in the array part of the GLOB until either C<reader> or C<writer> is called. =back =head1 METHODS =over 4 =item reader ([ARGS]) The object is re-blessed into a sub-class of C<IO::Handle>, and becomes a handle at the reading end of the pipe. If C<ARGS> are given then C<fork> is called and C<ARGS> are passed to exec. =item writer ([ARGS]) The object is re-blessed into a sub-class of C<IO::Handle>, and becomes a handle at the writing end of the pipe. If C<ARGS> are given then C<fork> is called and C<ARGS> are passed to exec. =item handles () This method is called during construction by C<IO::Pipe::new> on the newly created C<IO::Pipe> object. It returns an array of two objects blessed into C<IO::Pipe::End>, or a subclass thereof. =back =head1 SEE ALSO L<IO::Handle> =head1 AUTHOR Graham Barr. Currently maintained by the Perl Porters. Please report all bugs to <perlbug@perl.org>. =head1 COPYRIGHT Copyright (c) 1996-8 Graham Barr <gbarr@pobox.com>. All rights reserved. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. =cut PK d�\��"�0 �0 Socket/INET.pmnu �[��� # IO::Socket::INET.pm # # Copyright (c) 1997-8 Graham Barr <gbarr@pobox.com>. All rights reserved. # This program is free software; you can redistribute it and/or # modify it under the same terms as Perl itself. package IO::Socket::INET; use strict; our(@ISA, $VERSION); use IO::Socket; use Socket; use Carp; use Exporter; use Errno; @ISA = qw(IO::Socket); $VERSION = "1.35"; my $EINVAL = exists(&Errno::EINVAL) ? Errno::EINVAL() : 1; IO::Socket::INET->register_domain( AF_INET ); my %socket_type = ( tcp => SOCK_STREAM, udp => SOCK_DGRAM, icmp => SOCK_RAW ); my %proto_number; $proto_number{tcp} = Socket::IPPROTO_TCP() if defined &Socket::IPPROTO_TCP; $proto_number{udp} = Socket::IPPROTO_UDP() if defined &Socket::IPPROTO_UDP; $proto_number{icmp} = Socket::IPPROTO_ICMP() if defined &Socket::IPPROTO_ICMP; my %proto_name = reverse %proto_number; sub new { my $class = shift; unshift(@_, "PeerAddr") if @_ == 1; return $class->SUPER::new(@_); } sub _cache_proto { my @proto = @_; for (map lc($_), $proto[0], split(' ', $proto[1])) { $proto_number{$_} = $proto[2]; } $proto_name{$proto[2]} = $proto[0]; } sub _get_proto_number { my $name = lc(shift); return undef unless defined $name; return $proto_number{$name} if exists $proto_number{$name}; my @proto = eval { getprotobyname($name) }; return undef unless @proto; _cache_proto(@proto); return $proto[2]; } sub _get_proto_name { my $num = shift; return undef unless defined $num; return $proto_name{$num} if exists $proto_name{$num}; my @proto = eval { getprotobynumber($num) }; return undef unless @proto; _cache_proto(@proto); return $proto[0]; } sub _sock_info { my($addr,$port,$proto) = @_; my $origport = $port; my @serv = (); $port = $1 if(defined $addr && $addr =~ s,:([\w\(\)/]+)$,,); if(defined $proto && $proto =~ /\D/) { my $num = _get_proto_number($proto); unless (defined $num) { $@ = "Bad protocol '$proto'"; return; } $proto = $num; } if(defined $port) { my $defport = ($port =~ s,\((\d+)\)$,,) ? $1 : undef; my $pnum = ($port =~ m,^(\d+)$,)[0]; @serv = getservbyname($port, _get_proto_name($proto) || "") if ($port =~ m,\D,); $port = $serv[2] || $defport || $pnum; unless (defined $port) { $@ = "Bad service '$origport'"; return; } $proto = _get_proto_number($serv[3]) if @serv && !$proto; } return ($addr || undef, $port || undef, $proto || undef ); } sub _error { my $sock = shift; my $err = shift; { local($!); my $title = ref($sock).": "; $@ = join("", $_[0] =~ /^$title/ ? "" : $title, @_); $sock->close() if(defined fileno($sock)); } $! = $err; return undef; } sub _get_addr { my($sock,$addr_str, $multi) = @_; my @addr; if ($multi && $addr_str !~ /^\d+(?:\.\d+){3}$/) { (undef, undef, undef, undef, @addr) = gethostbyname($addr_str); } else { my $h = inet_aton($addr_str); push(@addr, $h) if defined $h; } @addr; } sub configure { my($sock,$arg) = @_; my($lport,$rport,$laddr,$raddr,$proto,$type); $arg->{LocalAddr} = $arg->{LocalHost} if exists $arg->{LocalHost} && !exists $arg->{LocalAddr}; ($laddr,$lport,$proto) = _sock_info($arg->{LocalAddr}, $arg->{LocalPort}, $arg->{Proto}) or return _error($sock, $!, $@); $laddr = defined $laddr ? inet_aton($laddr) : INADDR_ANY; return _error($sock, $EINVAL, "Bad hostname '",$arg->{LocalAddr},"'") unless(defined $laddr); $arg->{PeerAddr} = $arg->{PeerHost} if exists $arg->{PeerHost} && !exists $arg->{PeerAddr}; unless(exists $arg->{Listen}) { ($raddr,$rport,$proto) = _sock_info($arg->{PeerAddr}, $arg->{PeerPort}, $proto) or return _error($sock, $!, $@); } $proto ||= _get_proto_number('tcp'); $type = $arg->{Type} || $socket_type{lc _get_proto_name($proto)}; my @raddr = (); if(defined $raddr) { @raddr = $sock->_get_addr($raddr, $arg->{MultiHomed}); return _error($sock, $EINVAL, "Bad hostname '",$arg->{PeerAddr},"'") unless @raddr; } while(1) { $sock->socket(AF_INET, $type, $proto) or return _error($sock, $!, "$!"); if (defined $arg->{Blocking}) { defined $sock->blocking($arg->{Blocking}) or return _error($sock, $!, "$!"); } if ($arg->{Reuse} || $arg->{ReuseAddr}) { $sock->sockopt(SO_REUSEADDR,1) or return _error($sock, $!, "$!"); } if ($arg->{ReusePort}) { $sock->sockopt(SO_REUSEPORT,1) or return _error($sock, $!, "$!"); } if ($arg->{Broadcast}) { $sock->sockopt(SO_BROADCAST,1) or return _error($sock, $!, "$!"); } if($lport || ($laddr ne INADDR_ANY) || exists $arg->{Listen}) { $sock->bind($lport || 0, $laddr) or return _error($sock, $!, "$!"); } if(exists $arg->{Listen}) { $sock->listen($arg->{Listen} || 5) or return _error($sock, $!, "$!"); last; } # don't try to connect unless we're given a PeerAddr last unless exists($arg->{PeerAddr}); $raddr = shift @raddr; return _error($sock, $EINVAL, 'Cannot determine remote port') unless($rport || $type == SOCK_DGRAM || $type == SOCK_RAW); last unless($type == SOCK_STREAM || defined $raddr); return _error($sock, $EINVAL, "Bad hostname '",$arg->{PeerAddr},"'") unless defined $raddr; # my $timeout = ${*$sock}{'io_socket_timeout'}; # my $before = time() if $timeout; undef $@; if ($sock->connect(pack_sockaddr_in($rport, $raddr))) { # ${*$sock}{'io_socket_timeout'} = $timeout; return $sock; } return _error($sock, $!, $@ || "Timeout") unless @raddr; # if ($timeout) { # my $new_timeout = $timeout - (time() - $before); # return _error($sock, # (exists(&Errno::ETIMEDOUT) ? Errno::ETIMEDOUT() : $EINVAL), # "Timeout") if $new_timeout <= 0; # ${*$sock}{'io_socket_timeout'} = $new_timeout; # } } $sock; } sub connect { @_ == 2 || @_ == 3 or croak 'usage: $sock->connect(NAME) or $sock->connect(PORT, ADDR)'; my $sock = shift; return $sock->SUPER::connect(@_ == 1 ? shift : pack_sockaddr_in(@_)); } sub bind { @_ == 2 || @_ == 3 or croak 'usage: $sock->bind(NAME) or $sock->bind(PORT, ADDR)'; my $sock = shift; return $sock->SUPER::bind(@_ == 1 ? shift : pack_sockaddr_in(@_)) } sub sockaddr { @_ == 1 or croak 'usage: $sock->sockaddr()'; my($sock) = @_; my $name = $sock->sockname; $name ? (sockaddr_in($name))[1] : undef; } sub sockport { @_ == 1 or croak 'usage: $sock->sockport()'; my($sock) = @_; my $name = $sock->sockname; $name ? (sockaddr_in($name))[0] : undef; } sub sockhost { @_ == 1 or croak 'usage: $sock->sockhost()'; my($sock) = @_; my $addr = $sock->sockaddr; $addr ? inet_ntoa($addr) : undef; } sub peeraddr { @_ == 1 or croak 'usage: $sock->peeraddr()'; my($sock) = @_; my $name = $sock->peername; $name ? (sockaddr_in($name))[1] : undef; } sub peerport { @_ == 1 or croak 'usage: $sock->peerport()'; my($sock) = @_; my $name = $sock->peername; $name ? (sockaddr_in($name))[0] : undef; } sub peerhost { @_ == 1 or croak 'usage: $sock->peerhost()'; my($sock) = @_; my $addr = $sock->peeraddr; $addr ? inet_ntoa($addr) : undef; } 1; __END__ =head1 NAME IO::Socket::INET - Object interface for AF_INET domain sockets =head1 SYNOPSIS use IO::Socket::INET; =head1 DESCRIPTION C<IO::Socket::INET> provides an object interface to creating and using sockets in the AF_INET domain. It is built upon the L<IO::Socket> interface and inherits all the methods defined by L<IO::Socket>. =head1 CONSTRUCTOR =over 4 =item new ( [ARGS] ) Creates an C<IO::Socket::INET> object, which is a reference to a newly created symbol (see the C<Symbol> package). C<new> optionally takes arguments, these arguments are in key-value pairs. In addition to the key-value pairs accepted by L<IO::Socket>, C<IO::Socket::INET> provides. PeerAddr Remote host address <hostname>[:<port>] PeerHost Synonym for PeerAddr PeerPort Remote port or service <service>[(<no>)] | <no> LocalAddr Local host bind address hostname[:port] LocalHost Synonym for LocalAddr LocalPort Local host bind port <service>[(<no>)] | <no> Proto Protocol name (or number) "tcp" | "udp" | ... Type Socket type SOCK_STREAM | SOCK_DGRAM | ... Listen Queue size for listen ReuseAddr Set SO_REUSEADDR before binding Reuse Set SO_REUSEADDR before binding (deprecated, prefer ReuseAddr) ReusePort Set SO_REUSEPORT before binding Broadcast Set SO_BROADCAST before binding Timeout Timeout value for various operations MultiHomed Try all addresses for multi-homed hosts Blocking Determine if connection will be blocking mode If C<Listen> is defined then a listen socket is created, else if the socket type, which is derived from the protocol, is SOCK_STREAM then connect() is called. If the C<Listen> argument is given, but false, the queue size will be set to 5. Although it is not illegal, the use of C<MultiHomed> on a socket which is in non-blocking mode is of little use. This is because the first connect will never fail with a timeout as the connect call will not block. The C<PeerAddr> can be a hostname or the IP-address on the "xx.xx.xx.xx" form. The C<PeerPort> can be a number or a symbolic service name. The service name might be followed by a number in parenthesis which is used if the service is not known by the system. The C<PeerPort> specification can also be embedded in the C<PeerAddr> by preceding it with a ":". If C<Proto> is not given and you specify a symbolic C<PeerPort> port, then the constructor will try to derive C<Proto> from the service name. As a last resort C<Proto> "tcp" is assumed. The C<Type> parameter will be deduced from C<Proto> if not specified. If the constructor is only passed a single argument, it is assumed to be a C<PeerAddr> specification. If C<Blocking> is set to 0, the connection will be in nonblocking mode. If not specified it defaults to 1 (blocking mode). Examples: $sock = IO::Socket::INET->new(PeerAddr => 'www.perl.org', PeerPort => 'http(80)', Proto => 'tcp'); $sock = IO::Socket::INET->new(PeerAddr => 'localhost:smtp(25)'); $sock = IO::Socket::INET->new(Listen => 5, LocalAddr => 'localhost', LocalPort => 9000, Proto => 'tcp'); $sock = IO::Socket::INET->new('127.0.0.1:25'); $sock = IO::Socket::INET->new( PeerPort => 9999, PeerAddr => inet_ntoa(INADDR_BROADCAST), Proto => udp, LocalAddr => 'localhost', Broadcast => 1 ) or die "Can't bind : $@\n"; NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE As of VERSION 1.18 all IO::Socket objects have autoflush turned on by default. This was not the case with earlier releases. NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE =back =head2 METHODS =over 4 =item sockaddr () Return the address part of the sockaddr structure for the socket =item sockport () Return the port number that the socket is using on the local host =item sockhost () Return the address part of the sockaddr structure for the socket in a text form xx.xx.xx.xx =item peeraddr () Return the address part of the sockaddr structure for the socket on the peer host =item peerport () Return the port number for the socket on the peer host. =item peerhost () Return the address part of the sockaddr structure for the socket on the peer host in a text form xx.xx.xx.xx =back =head1 SEE ALSO L<Socket>, L<IO::Socket> =head1 AUTHOR Graham Barr. Currently maintained by the Perl Porters. Please report all bugs to <perlbug@perl.org>. =head1 COPYRIGHT Copyright (c) 1996-8 Graham Barr <gbarr@pobox.com>. All rights reserved. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. =cut PK d�\Xp�J_ _ Socket/UNIX.pmnu �[��� # IO::Socket::UNIX.pm # # Copyright (c) 1997-8 Graham Barr <gbarr@pobox.com>. All rights reserved. # This program is free software; you can redistribute it and/or # modify it under the same terms as Perl itself. package IO::Socket::UNIX; use strict; our(@ISA, $VERSION); use IO::Socket; use Carp; @ISA = qw(IO::Socket); $VERSION = "1.26"; $VERSION = eval $VERSION; IO::Socket::UNIX->register_domain( AF_UNIX ); sub new { my $class = shift; unshift(@_, "Peer") if @_ == 1; return $class->SUPER::new(@_); } sub configure { my($sock,$arg) = @_; my($bport,$cport); my $type = $arg->{Type} || SOCK_STREAM; $sock->socket(AF_UNIX, $type, 0) or return undef; if(exists $arg->{Local}) { my $addr = sockaddr_un($arg->{Local}); $sock->bind($addr) or return undef; } if(exists $arg->{Listen} && $type != SOCK_DGRAM) { $sock->listen($arg->{Listen} || 5) or return undef; } elsif(exists $arg->{Peer}) { my $addr = sockaddr_un($arg->{Peer}); $sock->connect($addr) or return undef; } $sock; } sub hostpath { @_ == 1 or croak 'usage: $sock->hostpath()'; my $n = $_[0]->sockname || return undef; (sockaddr_un($n))[0]; } sub peerpath { @_ == 1 or croak 'usage: $sock->peerpath()'; my $n = $_[0]->peername || return undef; (sockaddr_un($n))[0]; } 1; # Keep require happy __END__ =head1 NAME IO::Socket::UNIX - Object interface for AF_UNIX domain sockets =head1 SYNOPSIS use IO::Socket::UNIX; my $SOCK_PATH = "$ENV{HOME}/unix-domain-socket-test.sock"; # Server: my $server = IO::Socket::UNIX->new( Type => SOCK_STREAM(), Local => $SOCK_PATH, Listen => 1, ); my $count = 1; while (my $conn = $server->accept()) { $conn->print("Hello " . ($count++) . "\n"); } # Client: my $client = IO::Socket::UNIX->new( Type => SOCK_STREAM(), Peer => $SOCK_PATH, ); # Now read and write from $client =head1 DESCRIPTION C<IO::Socket::UNIX> provides an object interface to creating and using sockets in the AF_UNIX domain. It is built upon the L<IO::Socket> interface and inherits all the methods defined by L<IO::Socket>. =head1 CONSTRUCTOR =over 4 =item new ( [ARGS] ) Creates an C<IO::Socket::UNIX> object, which is a reference to a newly created symbol (see the C<Symbol> package). C<new> optionally takes arguments, these arguments are in key-value pairs. In addition to the key-value pairs accepted by L<IO::Socket>, C<IO::Socket::UNIX> provides. Type Type of socket (eg SOCK_STREAM or SOCK_DGRAM) Local Path to local fifo Peer Path to peer fifo Listen Queue size for listen If the constructor is only passed a single argument, it is assumed to be a C<Peer> specification. If the C<Listen> argument is given, but false, the queue size will be set to 5. =back =head1 METHODS =over 4 =item hostpath() Returns the pathname to the fifo at the local end =item peerpath() Returns the pathanme to the fifo at the peer end =back =head1 SEE ALSO L<Socket>, L<IO::Socket> =head1 AUTHOR Graham Barr. Currently maintained by the Perl Porters. Please report all bugs to <perlbug@perl.org>. =head1 COPYRIGHT Copyright (c) 1996-8 Graham Barr <gbarr@pobox.com>. All rights reserved. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. =cut PK d�\l�ǻ � Poll.pmnu �[��� # IO::Poll.pm # # Copyright (c) 1997-8 Graham Barr <gbarr@pobox.com>. All rights reserved. # This program is free software; you can redistribute it and/or # modify it under the same terms as Perl itself. package IO::Poll; use strict; use IO::Handle; use Exporter (); our(@ISA, @EXPORT_OK, @EXPORT, $VERSION); @ISA = qw(Exporter); $VERSION = "0.10"; @EXPORT = qw( POLLIN POLLOUT POLLERR POLLHUP POLLNVAL ); @EXPORT_OK = qw( POLLPRI POLLRDNORM POLLWRNORM POLLRDBAND POLLWRBAND POLLNORM ); # [0] maps fd's to requested masks # [1] maps fd's to returned masks # [2] maps fd's to handles sub new { my $class = shift; my $self = bless [{},{},{}], $class; $self; } sub mask { my $self = shift; my $io = shift; my $fd = fileno($io); return unless defined $fd; if (@_) { my $mask = shift; if($mask) { $self->[0]{$fd}{$io} = $mask; # the error events are always returned $self->[1]{$fd} = 0; # output mask $self->[2]{$io} = $io; # remember handle } else { delete $self->[0]{$fd}{$io}; unless(%{$self->[0]{$fd}}) { # We no longer have any handles for this FD delete $self->[1]{$fd}; delete $self->[0]{$fd}; } delete $self->[2]{$io}; } } return unless exists $self->[0]{$fd} and exists $self->[0]{$fd}{$io}; return $self->[0]{$fd}{$io}; } sub poll { my($self,$timeout) = @_; $self->[1] = {}; my($fd,$mask,$iom); my @poll = (); while(($fd,$iom) = each %{$self->[0]}) { $mask = 0; $mask |= $_ for values(%$iom); push(@poll,$fd => $mask); } my $ret = _poll(defined($timeout) ? $timeout * 1000 : -1,@poll); return $ret unless $ret > 0; while(@poll) { my($fd,$got) = splice(@poll,0,2); $self->[1]{$fd} = $got if $got; } return $ret; } sub events { my $self = shift; my $io = shift; my $fd = fileno($io); exists $self->[1]{$fd} and exists $self->[0]{$fd}{$io} ? $self->[1]{$fd} & ($self->[0]{$fd}{$io}|POLLHUP|POLLERR|POLLNVAL) : 0; } sub remove { my $self = shift; my $io = shift; $self->mask($io,0); } sub handles { my $self = shift; return values %{$self->[2]} unless @_; my $events = shift || 0; my($fd,$ev,$io,$mask); my @handles = (); while(($fd,$ev) = each %{$self->[1]}) { while (($io,$mask) = each %{$self->[0]{$fd}}) { $mask |= POLLHUP|POLLERR|POLLNVAL; # must allow these push @handles,$self->[2]{$io} if ($ev & $mask) & $events; } } return @handles; } 1; __END__ =head1 NAME IO::Poll - Object interface to system poll call =head1 SYNOPSIS use IO::Poll qw(POLLRDNORM POLLWRNORM POLLIN POLLHUP); $poll = IO::Poll->new(); $poll->mask($input_handle => POLLIN); $poll->mask($output_handle => POLLOUT); $poll->poll($timeout); $ev = $poll->events($input); =head1 DESCRIPTION C<IO::Poll> is a simple interface to the system level poll routine. =head1 METHODS =over 4 =item mask ( IO [, EVENT_MASK ] ) If EVENT_MASK is given, then, if EVENT_MASK is non-zero, IO is added to the list of file descriptors and the next call to poll will check for any event specified in EVENT_MASK. If EVENT_MASK is zero then IO will be removed from the list of file descriptors. If EVENT_MASK is not given then the return value will be the current event mask value for IO. =item poll ( [ TIMEOUT ] ) Call the system level poll routine. If TIMEOUT is not specified then the call will block. Returns the number of handles which had events happen, or -1 on error. =item events ( IO ) Returns the event mask which represents the events that happened on IO during the last call to C<poll>. =item remove ( IO ) Remove IO from the list of file descriptors for the next poll. =item handles( [ EVENT_MASK ] ) Returns a list of handles. If EVENT_MASK is not given then a list of all handles known will be returned. If EVENT_MASK is given then a list of handles will be returned which had one of the events specified by EVENT_MASK happen during the last call ti C<poll> =back =head1 SEE ALSO L<poll(2)>, L<IO::Handle>, L<IO::Select> =head1 AUTHOR Graham Barr. Currently maintained by the Perl Porters. Please report all bugs to <perlbug@perl.org>. =head1 COPYRIGHT Copyright (c) 1997-8 Graham Barr <gbarr@pobox.com>. All rights reserved. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. =cut PK X �\��%� � Tty.pmnu �[��� # Documentation at the __END__ # -*-cperl-*- package IO::Tty; use IO::Handle; use IO::File; use IO::Tty::Constant; use Carp; require POSIX; require DynaLoader; use vars qw(@ISA $VERSION $XS_VERSION $CONFIG $DEBUG); $VERSION = '1.12'; $XS_VERSION = "1.12"; @ISA = qw(IO::Handle); eval { local $^W = 0; undef local $SIG{__DIE__}; require IO::Stty }; push @ISA, "IO::Stty" if (not $@); # if IO::Stty is installed BOOT_XS: { # If I inherit DynaLoader then I inherit AutoLoader and I DON'T WANT TO require DynaLoader; # DynaLoader calls dl_load_flags as a static method. *dl_load_flags = DynaLoader->can('dl_load_flags'); do { defined(&bootstrap) ? \&bootstrap : \&DynaLoader::bootstrap }->(__PACKAGE__); } sub import { IO::Tty::Constant->export_to_level(1, @_); } sub open { my($tty,$dev,$mode) = @_; IO::File::open($tty,$dev,$mode) or return undef; $tty->autoflush; 1; } sub clone_winsize_from { my ($self, $fh) = @_; croak "Given filehandle is not a tty in clone_winsize_from, called" if not POSIX::isatty($fh); return 1 if not POSIX::isatty($self); # ignored for master ptys my $winsize = " "x1024; # preallocate memory ioctl($fh, &IO::Tty::Constant::TIOCGWINSZ, $winsize) and ioctl($self, &IO::Tty::Constant::TIOCSWINSZ, $winsize) and return 1; warn "clone_winsize_from: error: $!" if $^W; return undef; } # ioctl() doesn't tell us how long the structure is, so we'll have to trim it # after TIOCGWINSZ my $SIZEOF_WINSIZE = length IO::Tty::pack_winsize(0,0,0,0); sub get_winsize { my $self = shift; ioctl($self, IO::Tty::Constant::TIOCGWINSZ(), my $winsize) or croak "Cannot TIOCGWINSZ - $!"; substr($winsize, $SIZEOF_WINSIZE) = ""; return IO::Tty::unpack_winsize($winsize); } sub set_winsize { my $self = shift; my $winsize = IO::Tty::pack_winsize(@_); ioctl($self, IO::Tty::Constant::TIOCSWINSZ(), $winsize) or croak "Cannot TIOCSWINSZ - $!"; } sub set_raw($) { require POSIX; my $self = shift; return 1 if not POSIX::isatty($self); my $ttyno = fileno($self); my $termios = new POSIX::Termios; unless ($termios) { warn "set_raw: new POSIX::Termios failed: $!"; return undef; } unless ($termios->getattr($ttyno)) { warn "set_raw: getattr($ttyno) failed: $!"; return undef; } $termios->setiflag(0); $termios->setoflag(0); $termios->setlflag(0); $termios->setcc(&POSIX::VMIN, 1); $termios->setcc(&POSIX::VTIME, 0); unless ($termios->setattr($ttyno, &POSIX::TCSANOW)) { warn "set_raw: setattr($ttyno) failed: $!"; return undef; } return 1; } 1; __END__ =head1 NAME IO::Tty - Low-level allocate a pseudo-Tty, import constants. =head1 VERSION 1.12 =head1 SYNOPSIS use IO::Tty qw(TIOCNOTTY); ... # use only to import constants, see IO::Pty to create ptys. =head1 DESCRIPTION C<IO::Tty> is used internally by C<IO::Pty> to create a pseudo-tty. You wouldn't want to use it directly except to import constants, use C<IO::Pty>. For a list of importable constants, see L<IO::Tty::Constant>. Windows is now supported, but ONLY under the Cygwin environment, see L<http://sources.redhat.com/cygwin/>. Please note that pty creation is very system-dependend. From my experience, any modern POSIX system should be fine. Find below a list of systems that C<IO::Tty> should work on. A more detailed table (which is slowly getting out-of-date) is available from the project pages document manager at SourceForge L<http://sourceforge.net/projects/expectperl/>. If you have problems on your system and your system is listed in the "verified" list, you probably have some non-standard setup, e.g. you compiled your Linux-kernel yourself and disabled ptys (bummer!). Please ask your friendly sysadmin for help. If your system is not listed, unpack the latest version of C<IO::Tty>, do a C<'perl Makefile.PL; make; make test; uname -a'> and send me (F<RGiersig@cpan.org>) the results and I'll see what I can deduce from that. There are chances that it will work right out-of-the-box... If it's working on your system, please send me a short note with details (version number, distribution, etc. 'uname -a' and 'perl -V' is a good start; also, the output from "perl Makefile.PL" contains a lot of interesting info, so please include that as well) so I can get an overview. Thanks! =head1 VERIFIED SYSTEMS, KNOWN ISSUES This is a list of systems that C<IO::Tty> seems to work on ('make test' passes) with comments about "features": =over 4 =item * AIX 4.3 Returns EIO instead of EOF when the slave is closed. Benign. =item * AIX 5.x =item * FreeBSD 4.4 EOF on the slave tty is not reported back to the master. =item * OpenBSD 2.8 The ioctl TIOCSCTTY sometimes fails. This is also known in Tcl/Expect, see http://expect.nist.gov/FAQ.html EOF on the slave tty is not reported back to the master. =item * Darwin 7.9.0 =item * HPUX 10.20 & 11.00 EOF on the slave tty is not reported back to the master. =item * IRIX 6.5 =item * Linux 2.2.x & 2.4.x Returns EIO instead of EOF when the slave is closed. Benign. =item * OSF 4.0 EOF on the slave tty is not reported back to the master. =item * Solaris 8, 2.7, 2.6 Has the "feature" of returning EOF just once?! EOF on the slave tty is not reported back to the master. =item * Windows NT/2k/XP (under Cygwin) When you send (print) a too long line (>160 chars) to a non-raw pty, the call just hangs forever and even alarm() cannot get you out. Don't complain to me... EOF on the slave tty is not reported back to the master. =item * z/OS =back The following systems have not been verified yet for this version, but a previous version worked on them: =over 4 =item * SCO Unix =item * NetBSD probably the same as the other *BSDs... =back If you have additions to these lists, please mail them to E<lt>F<RGiersig@cpan.org>E<gt>. =head1 SEE ALSO L<IO::Pty>, L<IO::Tty::Constant> =head1 MAILING LISTS As this module is mainly used by Expect, support for it is available via the two Expect mailing lists, expectperl-announce and expectperl-discuss, at http://lists.sourceforge.net/lists/listinfo/expectperl-announce and http://lists.sourceforge.net/lists/listinfo/expectperl-discuss =head1 AUTHORS Originally by Graham Barr E<lt>F<gbarr@pobox.com>E<gt>, based on the Ptty module by Nick Ing-Simmons E<lt>F<nik@tiuk.ti.com>E<gt>. Now maintained and heavily rewritten by Roland Giersig E<lt>F<RGiersig@cpan.org>E<gt>. Contains copyrighted stuff from openssh v3.0p1, authored by Tatu Ylonen <ylo@cs.hut.fi>, Markus Friedl and Todd C. Miller <Todd.Miller@courtesan.com>. I also got a lot of inspiration from the pty code in Xemacs. =head1 COPYRIGHT Now all code is free software; you can redistribute it and/or modify it under the same terms as Perl itself. Nevertheless the above AUTHORS retain their copyrights to the various parts and want to receive credit if their source code is used. See the source for details. =head1 DISCLAIMER THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. In other words: Use at your own risk. Provided as is. Your mileage may vary. Read the source, Luke! And finally, just to be sure: Any Use of This Product, in Any Manner Whatsoever, Will Increase the Amount of Disorder in the Universe. Although No Liability Is Implied Herein, the Consumer Is Warned That This Process Will Ultimately Lead to the Heat Death of the Universe. =cut PK X �\ 읔 Tty/Constant.pmnu �[��� package IO::Tty::Constant; use vars qw(@ISA @EXPORT_OK); require Exporter; @ISA = qw(Exporter); @EXPORT_OK = qw(B0 B110 B115200 B1200 B134 B150 B153600 B1800 B19200 B200 B230400 B2400 B300 B307200 B38400 B460800 B4800 B50 B57600 B600 B75 B76800 B9600 BRKINT BS0 BS1 BSDLY CBAUD CBAUDEXT CBRK CCTS_OFLOW CDEL CDSUSP CEOF CEOL CEOL2 CEOT CERASE CESC CFLUSH CIBAUD CIBAUDEXT CINTR CKILL CLNEXT CLOCAL CNSWTCH CNUL CQUIT CR0 CR1 CR2 CR3 CRDLY CREAD CRPRNT CRTSCTS CRTSXOFF CRTS_IFLOW CS5 CS6 CS7 CS8 CSIZE CSTART CSTOP CSTOPB CSUSP CSWTCH CWERASE DEFECHO DIOC DIOCGETP DIOCSETP DOSMODE ECHO ECHOCTL ECHOE ECHOK ECHOKE ECHONL ECHOPRT EXTA EXTB FF0 FF1 FFDLY FIORDCHK FLUSHO HUPCL ICANON ICRNL IEXTEN IGNBRK IGNCR IGNPAR IMAXBEL INLCR INPCK ISIG ISTRIP IUCLC IXANY IXOFF IXON KBENABLED LDCHG LDCLOSE LDDMAP LDEMAP LDGETT LDGMAP LDIOC LDNMAP LDOPEN LDSETT LDSMAP LOBLK NCCS NL0 NL1 NLDLY NOFLSH OCRNL OFDEL OFILL OLCUC ONLCR ONLRET ONOCR OPOST PAGEOUT PARENB PAREXT PARMRK PARODD PENDIN RCV1EN RTS_TOG TAB0 TAB1 TAB2 TAB3 TABDLY TCDSET TCFLSH TCGETA TCGETS TCIFLUSH TCIOFF TCIOFLUSH TCION TCOFLUSH TCOOFF TCOON TCSADRAIN TCSAFLUSH TCSANOW TCSBRK TCSETA TCSETAF TCSETAW TCSETCTTY TCSETS TCSETSF TCSETSW TCXONC TERM_D40 TERM_D42 TERM_H45 TERM_NONE TERM_TEC TERM_TEX TERM_V10 TERM_V61 TIOCCBRK TIOCCDTR TIOCCONS TIOCEXCL TIOCFLUSH TIOCGETD TIOCGETC TIOCGETP TIOCGLTC TIOCSETC TIOCSETN TIOCSETP TIOCSLTC TIOCGPGRP TIOCGSID TIOCGSOFTCAR TIOCGWINSZ TIOCHPCL TIOCKBOF TIOCKBON TIOCLBIC TIOCLBIS TIOCLGET TIOCLSET TIOCMBIC TIOCMBIS TIOCMGET TIOCMSET TIOCM_CAR TIOCM_CD TIOCM_CTS TIOCM_DSR TIOCM_DTR TIOCM_LE TIOCM_RI TIOCM_RNG TIOCM_RTS TIOCM_SR TIOCM_ST TIOCNOTTY TIOCNXCL TIOCOUTQ TIOCREMOTE TIOCSBRK TIOCSCTTY TIOCSDTR TIOCSETD TIOCSIGNAL TIOCSPGRP TIOCSSID TIOCSSOFTCAR TIOCSTART TIOCSTI TIOCSTOP TIOCSWINSZ TM_ANL TM_CECHO TM_CINVIS TM_LCF TM_NONE TM_SET TM_SNL TOSTOP VCEOF VCEOL VDISCARD VDSUSP VEOF VEOL VEOL2 VERASE VINTR VKILL VLNEXT VMIN VQUIT VREPRINT VSTART VSTOP VSUSP VSWTCH VT0 VT1 VTDLY VTIME VWERASE WRAP XCASE XCLUDE XMT1EN XTABS); __END__ =head1 NAME IO::Tty::Constant - Terminal Constants (autogenerated) =head1 SYNOPSIS use IO::Tty::Constant qw(TIOCNOTTY); ... =head1 DESCRIPTION This package defines constants usually found in <termio.h> or <termios.h> (and their #include hierarchy). Find below an autogenerated alphabetic list of all known constants and whether they are defined on your system (prefixed with '+') and have compilation problems ('o'). Undefined or problematic constants are set to 'undef'. =head1 DEFINED CONSTANTS =item + B0 =item + B110 =item + B115200 =item + B1200 =item + B134 =item + B150 =item - B153600 =item + B1800 =item + B19200 =item + B200 =item + B230400 =item + B2400 =item + B300 =item - B307200 =item + B38400 =item + B460800 =item + B4800 =item + B50 =item + B57600 =item + B600 =item + B75 =item - B76800 =item + B9600 =item + BRKINT =item + BS0 =item + BS1 =item + BSDLY =item + CBAUD =item - CBAUDEXT =item + CBRK =item - CCTS_OFLOW =item - CDEL =item + CDSUSP =item + CEOF =item + CEOL =item - CEOL2 =item + CEOT =item + CERASE =item - CESC =item + CFLUSH =item + CIBAUD =item - CIBAUDEXT =item + CINTR =item + CKILL =item + CLNEXT =item + CLOCAL =item - CNSWTCH =item - CNUL =item + CQUIT =item + CR0 =item + CR1 =item + CR2 =item + CR3 =item + CRDLY =item + CREAD =item + CRPRNT =item + CRTSCTS =item - CRTSXOFF =item - CRTS_IFLOW =item + CS5 =item + CS6 =item + CS7 =item + CS8 =item + CSIZE =item + CSTART =item + CSTOP =item + CSTOPB =item + CSUSP =item - CSWTCH =item + CWERASE =item - DEFECHO =item - DIOC =item - DIOCGETP =item - DIOCSETP =item - DOSMODE =item + ECHO =item + ECHOCTL =item + ECHOE =item + ECHOK =item + ECHOKE =item + ECHONL =item + ECHOPRT =item + EXTA =item + EXTB =item + FF0 =item + FF1 =item + FFDLY =item - FIORDCHK =item + FLUSHO =item + HUPCL =item + ICANON =item + ICRNL =item + IEXTEN =item + IGNBRK =item + IGNCR =item + IGNPAR =item + IMAXBEL =item + INLCR =item + INPCK =item + ISIG =item + ISTRIP =item + IUCLC =item + IXANY =item + IXOFF =item + IXON =item - KBENABLED =item - LDCHG =item - LDCLOSE =item - LDDMAP =item - LDEMAP =item - LDGETT =item - LDGMAP =item - LDIOC =item - LDNMAP =item - LDOPEN =item - LDSETT =item - LDSMAP =item - LOBLK =item + NCCS =item + NL0 =item + NL1 =item + NLDLY =item + NOFLSH =item + OCRNL =item + OFDEL =item + OFILL =item + OLCUC =item + ONLCR =item + ONLRET =item + ONOCR =item + OPOST =item - PAGEOUT =item + PARENB =item - PAREXT =item + PARMRK =item + PARODD =item + PENDIN =item - RCV1EN =item - RTS_TOG =item + TAB0 =item + TAB1 =item + TAB2 =item + TAB3 =item + TABDLY =item - TCDSET =item + TCFLSH =item + TCGETA =item + TCGETS =item + TCIFLUSH =item + TCIOFF =item + TCIOFLUSH =item + TCION =item + TCOFLUSH =item + TCOOFF =item + TCOON =item + TCSADRAIN =item + TCSAFLUSH =item + TCSANOW =item + TCSBRK =item + TCSETA =item + TCSETAF =item + TCSETAW =item - TCSETCTTY =item + TCSETS =item + TCSETSF =item + TCSETSW =item + TCXONC =item - TERM_D40 =item - TERM_D42 =item - TERM_H45 =item - TERM_NONE =item - TERM_TEC =item - TERM_TEX =item - TERM_V10 =item - TERM_V61 =item + TIOCCBRK =item - TIOCCDTR =item + TIOCCONS =item + TIOCEXCL =item - TIOCFLUSH =item + TIOCGETD =item - TIOCGETC =item - TIOCGETP =item - TIOCGLTC =item - TIOCSETC =item - TIOCSETN =item - TIOCSETP =item - TIOCSLTC =item + TIOCGPGRP =item + TIOCGSID =item + TIOCGSOFTCAR =item + TIOCGWINSZ =item - TIOCHPCL =item - TIOCKBOF =item - TIOCKBON =item - TIOCLBIC =item - TIOCLBIS =item - TIOCLGET =item - TIOCLSET =item + TIOCMBIC =item + TIOCMBIS =item + TIOCMGET =item + TIOCMSET =item + TIOCM_CAR =item + TIOCM_CD =item + TIOCM_CTS =item + TIOCM_DSR =item + TIOCM_DTR =item + TIOCM_LE =item + TIOCM_RI =item + TIOCM_RNG =item + TIOCM_RTS =item + TIOCM_SR =item + TIOCM_ST =item + TIOCNOTTY =item + TIOCNXCL =item + TIOCOUTQ =item - TIOCREMOTE =item + TIOCSBRK =item + TIOCSCTTY =item - TIOCSDTR =item + TIOCSETD =item - TIOCSIGNAL =item + TIOCSPGRP =item - TIOCSSID =item + TIOCSSOFTCAR =item - TIOCSTART =item + TIOCSTI =item - TIOCSTOP =item + TIOCSWINSZ =item - TM_ANL =item - TM_CECHO =item - TM_CINVIS =item - TM_LCF =item - TM_NONE =item - TM_SET =item - TM_SNL =item + TOSTOP =item - VCEOF =item - VCEOL =item + VDISCARD =item - VDSUSP =item + VEOF =item + VEOL =item + VEOL2 =item + VERASE =item + VINTR =item + VKILL =item + VLNEXT =item + VMIN =item + VQUIT =item + VREPRINT =item + VSTART =item + VSTOP =item + VSUSP =item - VSWTCH =item + VT0 =item + VT1 =item + VTDLY =item + VTIME =item + VWERASE =item - WRAP =item + XCASE =item - XCLUDE =item - XMT1EN =item + XTABS =head1 FOR MORE INFO SEE L<IO::Tty> =cut PK X �\Kg���# �# Pty.pmnu �[��� # Documentation at the __END__ package IO::Pty; use strict; use Carp; use IO::Tty qw(TIOCSCTTY TCSETCTTY TIOCNOTTY); use IO::File; require POSIX; use vars qw(@ISA $VERSION); $VERSION = '1.12'; # keep same as in Tty.pm @ISA = qw(IO::Handle); eval { local $^W = 0; undef local $SIG{__DIE__}; require IO::Stty }; push @ISA, "IO::Stty" if (not $@); # if IO::Stty is installed sub new { my ($class) = $_[0] || "IO::Pty"; $class = ref($class) if ref($class); @_ <= 1 or croak 'usage: new $class'; my ($ptyfd, $ttyfd, $ttyname) = pty_allocate(); croak "Cannot open a pty" if not defined $ptyfd; my $pty = $class->SUPER::new_from_fd($ptyfd, "r+"); croak "Cannot create a new $class from fd $ptyfd: $!" if not $pty; $pty->autoflush(1); bless $pty => $class; my $slave = IO::Tty->new_from_fd($ttyfd, "r+"); croak "Cannot create a new IO::Tty from fd $ttyfd: $!" if not $slave; $slave->autoflush(1); ${*$pty}{'io_pty_slave'} = $slave; ${*$pty}{'io_pty_ttyname'} = $ttyname; ${*$slave}{'io_tty_ttyname'} = $ttyname; return $pty; } sub ttyname { @_ == 1 or croak 'usage: $pty->ttyname();'; my $pty = shift; ${*$pty}{'io_pty_ttyname'}; } sub close_slave { @_ == 1 or croak 'usage: $pty->close_slave();'; my $master = shift; if (exists ${*$master}{'io_pty_slave'}) { close ${*$master}{'io_pty_slave'}; delete ${*$master}{'io_pty_slave'}; } } sub slave { @_ == 1 or croak 'usage: $pty->slave();'; my $master = shift; if (exists ${*$master}{'io_pty_slave'}) { return ${*$master}{'io_pty_slave'}; } my $tty = ${*$master}{'io_pty_ttyname'}; my $slave = new IO::Tty; $slave->open($tty, O_RDWR | O_NOCTTY) || croak "Cannot open slave $tty: $!"; return $slave; } sub make_slave_controlling_terminal { @_ == 1 or croak 'usage: $pty->make_slave_controlling_terminal();'; my $self = shift; local(*DEVTTY); # loose controlling terminal explicitly if (defined TIOCNOTTY) { if (open (\*DEVTTY, "/dev/tty")) { ioctl( \*DEVTTY, TIOCNOTTY, 0 ); close \*DEVTTY; } } # Create a new 'session', lose controlling terminal. if (not POSIX::setsid()) { warn "setsid() failed, strange behavior may result: $!\r\n" if $^W; } if (open(\*DEVTTY, "/dev/tty")) { warn "Could not disconnect from controlling terminal?!\n" if $^W; close \*DEVTTY; } # now open slave, this should set it as controlling tty on some systems my $ttyname = ${*$self}{'io_pty_ttyname'}; my $slv = new IO::Tty; $slv->open($ttyname, O_RDWR) or croak "Cannot open slave $ttyname: $!"; if (not exists ${*$self}{'io_pty_slave'}) { ${*$self}{'io_pty_slave'} = $slv; } else { $slv->close; } # Acquire a controlling terminal if this doesn't happen automatically if (not open(\*DEVTTY, "/dev/tty")) { if (defined TIOCSCTTY) { if (not defined ioctl( ${*$self}{'io_pty_slave'}, TIOCSCTTY, 0 )) { warn "warning: TIOCSCTTY failed, slave might not be set as controlling terminal: $!" if $^W; } } elsif (defined TCSETCTTY) { if (not defined ioctl( ${*$self}{'io_pty_slave'}, TCSETCTTY, 0 )) { warn "warning: TCSETCTTY failed, slave might not be set as controlling terminal: $!" if $^W; } } else { warn "warning: You have neither TIOCSCTTY nor TCSETCTTY on your system\n" if $^W; return 0; } } if (not open(\*DEVTTY, "/dev/tty")) { warn "Error: could not connect pty as controlling terminal!\n"; return undef; } else { close \*DEVTTY; } return 1; } *clone_winsize_from = \&IO::Tty::clone_winsize_from; *get_winsize = \&IO::Tty::get_winsize; *set_winsize = \&IO::Tty::set_winsize; *set_raw = \&IO::Tty::set_raw; 1; __END__ =head1 NAME IO::Pty - Pseudo TTY object class =head1 VERSION 1.12 =head1 SYNOPSIS use IO::Pty; $pty = new IO::Pty; $slave = $pty->slave; foreach $val (1..10) { print $pty "$val\n"; $_ = <$slave>; print "$_"; } close($slave); =head1 DESCRIPTION C<IO::Pty> provides an interface to allow the creation of a pseudo tty. C<IO::Pty> inherits from C<IO::Handle> and so provide all the methods defined by the C<IO::Handle> package. Please note that pty creation is very system-dependend. If you have problems, see L<IO::Tty> for help. =head1 CONSTRUCTOR =over 3 =item new The C<new> constructor takes no arguments and returns a new file object which is the master side of the pseudo tty. =back =head1 METHODS =over 4 =item ttyname() Returns the name of the slave pseudo tty. On UNIX machines this will be the pathname of the device. Use this name for informational purpose only, to get a slave filehandle, use slave(). =item slave() The C<slave> method will return the slave filehandle of the given master pty, opening it anew if necessary. If IO::Stty is installed, you can then call C<$slave-E<gt>stty()> to modify the terminal settings. =item close_slave() The slave filehandle will be closed and destroyed. This is necessary in the parent after forking to get rid of the open filehandle, otherwise the parent will not notice if the child exits. Subsequent calls of C<slave()> will return a newly opened slave filehandle. =item make_slave_controlling_terminal() This will set the slave filehandle as the controlling terminal of the current process, which will become a session leader, so this should only be called by a child process after a fork(), e.g. in the callback to C<sync_exec()> (see L<Proc::SyncExec>). See the C<try> script (also C<test.pl>) for an example how to correctly spawn a subprocess. =item set_raw() Will set the pty to raw. Note that this is a one-way operation, you need IO::Stty to set the terminal settings to anything else. On some systems, the master pty is not a tty. This method checks for that and returns success anyway on such systems. Note that this method must be called on the slave, and probably should be called on the master, just to be sure, i.e. $pty->slave->set_raw(); $pty->set_raw(); =item clone_winsize_from(\*FH) Gets the terminal size from filehandle FH (which must be a terminal) and transfers it to the pty. Returns true on success and undef on failure. Note that this must be called upon the I<slave>, i.e. $pty->slave->clone_winsize_from(\*STDIN); On some systems, the master pty also isatty. I actually have no idea if setting terminal sizes there is passed through to the slave, so if this method is called for a master that is not a tty, it silently returns OK. See the C<try> script for example code how to propagate SIGWINCH. =item get_winsize() Returns the terminal size, in a 4-element list. ($row, $col, $xpixel, $ypixel) = $tty->get_winsize() =item set_winsize($row, $col, $xpixel, $ypixel) Sets the terminal size. If not specified, C<$xpixel> and C<$ypixel> are set to 0. As with C<clone_winsize_from>, this must be called upon the I<slave>. =back =head1 SEE ALSO L<IO::Tty>, L<IO::Tty::Constant>, L<IO::Handle>, L<Expect>, L<Proc::SyncExec> =head1 MAILING LISTS As this module is mainly used by Expect, support for it is available via the two Expect mailing lists, expectperl-announce and expectperl-discuss, at http://lists.sourceforge.net/lists/listinfo/expectperl-announce and http://lists.sourceforge.net/lists/listinfo/expectperl-discuss =head1 AUTHORS Originally by Graham Barr E<lt>F<gbarr@pobox.com>E<gt>, based on the Ptty module by Nick Ing-Simmons E<lt>F<nik@tiuk.ti.com>E<gt>. Now maintained and heavily rewritten by Roland Giersig E<lt>F<RGiersig@cpan.org>E<gt>. Contains copyrighted stuff from openssh v3.0p1, authored by Tatu Ylonen <ylo@cs.hut.fi>, Markus Friedl and Todd C. Miller <Todd.Miller@courtesan.com>. =head1 COPYRIGHT Now all code is free software; you can redistribute it and/or modify it under the same terms as Perl itself. Nevertheless the above AUTHORS retain their copyrights to the various parts and want to receive credit if their source code is used. See the source for details. =head1 DISCLAIMER THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. In other words: Use at your own risk. Provided as is. Your mileage may vary. Read the source, Luke! And finally, just to be sure: Any Use of This Product, in Any Manner Whatsoever, Will Increase the Amount of Disorder in the Universe. Although No Liability Is Implied Herein, the Consumer Is Warned That This Process Will Ultimately Lead to the Heat Death of the Universe. =cut PK d�\�[f� � Dir.pmnu �[��� PK d�\ �& & . File.pmnu �[��� PK d�\3Y�8� � �( Select.pmnu �[��� PK d�\ ��)C C bI Handle.pmnu �[��� PK d�\�D���> �> �� Socket.pmnu �[��� PK d�\���w w �� Seekable.pmnu �[��� PK d�\V�y�` ` O� Pipe.pmnu �[��� PK d�\��"�0 �0 �� Socket/INET.pmnu �[��� PK d�\Xp�J_ _ � Socket/UNIX.pmnu �[��� PK d�\l�ǻ � }+ Poll.pmnu �[��� PK X �\��%� � o= Tty.pmnu �[��� PK X �\ 읔 E] Tty/Constant.pmnu �[��� PK X �\Kg���# �# �y Pty.pmnu �[��� PK � d�
| ver. 1.4 |
Github
|
.
| PHP 8.2.31 | Generation time: 0.8 |
proxy
|
phpinfo
|
Settings